Contents About this Manual FCC Compliance Statement. 4-Channel / 8-Channel DVR 16-Channel DVR 1.3 Parts and Functions. 13.1 Front Panel A-Channel DVR. 8-Channel DVR. 16-Channel DVR 1.3.2 Rear Panel... A-Channel DVR. B-Channel DVR. 16-Channel DVR 1.4 Mouse. 13 1.5 Remote Control.. 14 4-Channel / 8-Channel DVR 14 16-Channel DVR Chapter 2: Installation 2.1 Installing the Hard Disk Drive. 2.11 Installing HDD on 4-Channel / 8-Channel DVR. 2.1.2 Installing HDD on 16-Channel DVR. 2.2 Connecting the Power .. 2.
Contents 3.4 The Man Screen 2.4.1 Screen Icons . 3.4.2 Virtual Keyboard. 3.43 Locking the Screen 3.4.4 Pop-up Menu. 3.4.5 On Screen Display (OSD) menu.. 3.5 Screen Modes. 2.5.1 Live View 35.2 Split Mode 3.5.3 Picture-in-Picture (PIP) Mode, 3.54 SEQ View. 3.6 Using PTZ Controls. 2.6.1 Cruise Mode. 3.7 Zoom, 3.8 Manual Recording Chapter 4: Using the DVR 4.1 Setting the Display 4.1.1 Live Settings. 4.1.2 Output Settings. 4.1.3 Privacy Zone Settings. 4.2 Record Setup. 4.2.1 Record Parameter. 4.2.
Contents Authorizing Other Users 4.5.6 View System Info. 4.6.6 P2P Connect . 4.5 Advanced Settings. 4.6.1 Motion Detection Alarm Settings. Set Motion Detection Area 4.6.2 Other Alarm Settings 4.63 Maintenance Settings. Manual Reboot and Power Off Disable Startup Wizard Set Auto Reboot .. Update System Firmware. Load Default Settings. Chapter 5: Troubleshooting & FAQ 5.1 Troubleshooting. 5.2 Frequently Asked Questions Appendix: Specifications.
Preface About this Manual “The material In this document Is fo Information purpose and 1 subject t cheapen without prior native, Wo made every effort to ensure that this user's manual Is accurate and complete. However, no liability ks assured for any errors and omissions that may have occurred. ONIONSKIN FCC Compliance Statement ‘This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of tha FCC Rules.
Preface Safety Information A caution Th Toting dash with an arrow head small, nan ‘water rg, bo gene so slot th i: Than dangerous age” presence near by the ode’ closure which may brisk of piston. Safety Precautions * Do not touch lve electrical parts. Electric shock can be avoided. Follow the recommended practices listed below.
Chapter 1: Product Overview Chapter 1: Product Overview SESSIONS 1.1 Features device supports the following features: H.
Chapter 1: Product Overview 16-Channel DVR Ges LE Remote Control Mouse Batteries co-AIM Aver User Manual HDD Screw Kit Power Cord apter DVR User's Menus! SERIES 8
Chapter 1: Product Overview 1.3 Paris and Functions 1.3.1 Front Panel EE A-Channel DVR channel 14. CH Pres to delay Channel 1-4 In full ren, 2 play » | Press to enter Playback mode or play recorded videos. 3 snot W | Press to stop the video playback or stop manual recording. 4 [pause | Presto pause the video playback or enter the frame-playback mods. 5 [Rewind «4 | During video playback, press to rewind the video. 5 | Fast Forward »» | During video playback, press to fast forward the video.
Chapter 1: Product Overview ‘8-Channel DVR mom Channel 18 CH | Press to display Channel 1-8 In full screen. 2 (Play » | Press to enter Playback mode or play recorded videos. 3 [stop W | Press to stop the video playback or stop manual recording. 4 (pause I | Press to pause the video playback or mere the frame-playback mode. 5 [Rewind «4 | During video playback, press to rewind the video. 6 | Fast Forward > | During video playback, press tn fast forward the video. 7 | Record | Press to start manual recording.
Chapter 1: Product Overview 16-Channel DVR | i Channel 1-16 Press to display Channel 1-16 In full screen. Press to enter Playback made or play recorded ideas. Play Press to stop the video playback or stop manual record W | Press to pause the video playback or enter the frame-playback mode. 44 | During idea playback, press to rewind the video. Fast Forward »» | During video playback, press to fast forward the video. 8 Sent Press to start manual recording. Ble £ a Menu u | Press to enter or exit the OSD menu.
Chapter 1: Product Overview 1.3.2 Rear Panel 4-Channel DVR Kc cg @ Channel DVR Video mp | Channel DVR: Connects. minim oxide put devices BAC A-Channel DVR: Connects to a maximum of 4 video input devices (BRONC. 2 idea output | Connects to a video output device via BNC. 3 outputting | Connects to an audio output device via RCA. 4 [audio input | connects ta CH 1-CHA ado Input devices via RCA. 5 outputting | Connects to a monitor output vis HDMI. 6 |VeAoumut | Connects ta VGA mortar.
Chapter 1: Product Overview 9 16-Channel DVR = ‘Video Input Convicts to a maximum of 16 video Input devices via BNC. Video output | Connects to a video output device via BNC. Audio output | Connects to an audio output device via RCA. Audio Input ‘Connects to @ maximum of 4 audio Input devices via RCA, VGA output Connects to a VGA monitor: 0] Contingents £0 a Speed dome camera, sensor or alarm device Wa RS-485. IR-EXT port Connects to an IR extender device.
Chapter 1: Product Overview 1.5 Remote Control A-Channel / 8-Channel DVR 1 | gag immediacies Press to display channel [Mme Press “0° key to lock or unlock the current screen. pres spasmodically channels. 4 | MENU | Press to enter or et the Min Menu. press to enter the selected menu them and edt the setting. 6 Press to move up In the 05D men. presto move left or it In the OSD menu. 8 Press t move down In the 05D menu. o | Audio/ | In Playback mode, press to tun the audio on or off.
Chapter 1: Product Overview 16-Channel DVR icicles EE ETT 1 UO Press to start manual recording. 4 | PLAY | Prehistory recorded video. 2 | search | Pres tm enter search mode. 15 | MEM | press to enter or et the Main ens. 2 | zo |eestovewa2dchemeldssian | TT free to enter iti turret (FF) Numeric kes PP | mods. Press ta display the channel In full 17 | MUTE | Presumptuous audio or disable mute. “| 08 [seen Press to fat forward idea playback Crass “0” kay to lack or unlock the.
Chapter 2: Installation Chapter 2: Installation cE] 2.1 installing the Hard Disk Drive Depending on the package you have purchased, the hard disk drive may be In duded In the full package. If its not per-installed, follow the Installation Instructions on this user manual. DI NOT Install or rem the hers disk drive wheels tha device power is Lined on 2.1.1 Installing HDD on 4-Channel / 8-Channel DVR “The 4-channel / 8-channel DVR supports one 3.57 DATA hard disk drive.
Chapter 2: Installation 2.1.2 Installing HDD on 16-Channel DVR “The 16-channel DVR supports up to two 3.5” DATA hard disk dis, To Install the HOD, follow the steps below: 1 Loosen tha screws on tha lef, it, and rear sides as | 5 Attach tha DVR back to tha compartment using shown, four 4) screws(2# HDD). push back then Ift up the cover to remove ft. B 3 Detach the screws to remove the HDD bracket. and the DVR. 4 attach the HDD to the bracket using the four (4) supplied screws(1# HDD).
Chapter 2: Installation 2.2 Connecting the Power Use only the supplied power adapter that came with the DVR. cE] 1 Connect one end of the power adapter to the power connector on the back of the DVR. 2 Plug the other end of the power adapter Into the wall outlet. 3 Press tha power switch to tum on the parer. 2.3 Connecting to Monitors “The preview screen can be displayed on monitors via BNC, VGA, or HDMI connection. 2.3.
Chapter 2: Installation 2.3.2 VGA Connection Connect the video output of the DVR to the monitor via VGA connector as shown. ED] 2.3.3 HDMI Connection ‘Cont the video output of the DVR bo the monitor via HOMO connector as shown.
Chapter 2: Installation 2.4 Connecting the Cameras Connect the camera cables) to the video Input of the DVR via BNC or RS-485 connection. 2.4.1 BNC Connection ‘Cannot the camera cabals) to the dao Input of tha DVR ia BNC connector as shown.
Chapter 2: Installation 2.4.2 RS-485 Connection If you are using a PTZ speed dome, connect tha camera tabla to tha ‘video Input of the DVR via RS-485 ‘connector as shown. Eno 2.5 Connecting the Alarm You can connect one alarm device ia RS-485 electrician as shown.
Chapter 2: Installation 2.6 Connecting the Sensors You can connect sensors up to channels. The connectors are labeled according to channels. cE] 2.7 Connecting the Microphones ‘The DVR supports up to 4 audio Input channels. Microphones can bie connected directly via RCA connection. 2.7.1 RCA Connection Connect the microphones) using ACA cable connection as shown.
Chapter 2: Installation 2.8 Connecting to Network For remote monitoring, connect the DVR ta the Internet via wired network inaction. ‘a-Channel DVR 8-Channel DVR 1 Plug one end of the R45 cable 10 the LAN port on the back of the DVR. 2 Plug the other end directly Into a LAN part on 3 router or network swathe. After connecting, configure your DVR for network communication, See "4.4 Setting the Network” on gaps 52 for further details. 24.
Chapter 2: Installation 2.10 Connecting to Speakers You can connect speakers t the DVR via RCA connection. 2.10.1 RCA Connection Connect tha spark using ACA cabal connection as shown. cE] 4-Channel DVR 2.11 Connecting the Keyboard 2.11.1 Keyboard Connection ‘Connect the keyboard to DVR KB D+, Port ea shown. ‘Bat communication protocol 568 * 4.5.5 fatal 29k a pegs 82 Yor Airhead desalt. ots: Ara ta 16-channel Wordy.
Chapter 3: Getting Started Chapter 3: Meting Started ED] 3.1 Starting Up ‘Connect the power adapter tithe DVR, See “2.2 ingesting the Fowsr® on page 16 for further detail, 3.2 Set Startup Wizard 1 When the Startup Wizard screen appears on the screen, click Net Step to continue. ‘To cancel the Startup Wizard, unchecked the can on the checkbox and dick Ext ta dose the current menu. ‘The Startup Wizard wil not appear after the system reboots. 2 Format the hard disk drive.
Chapter 3: Getting Started 3 Bette recording schedule. See 4.2 Record Setup” on page. DVR User's Manual.
Chapter 3: Getting Started 6 Click Next Tap to save the settings. 7 When the In ital setup process Is complete, dick Close. prevent the Wizard Setup screen appears every time the system reboots, unlock "Show tis windows next ime’ to disable. 3.3 Shutting Down “Ta property tum off the DVR power, do the following: in the preview mode, right click on the nous to display the pop-up mine on the bottom of the screen. 2 Select Man Menu > ADVANCED, and then click Shirt Dawn.
Chapter 3: Getting Started 3 Awaking message appears on the screen, select OK to turn off the power. cE] 4 Walt until the *Now you can unplug the power!” message appears on the screen. Tum off the power switch on the back pane! of the DVR and then unplug the power cord from the power outlet.
Chapter 3: Getting Started 3.4 The Main Screen 3.4.1 Screen Icons. hers ar four types of recording cacao on the man scr of sate channel. Channel ule Current date & tine Motion detector actuated. © During recording mode, [3] loon or [£3] Eon appears Hard dik crv romeo i Fall on the screen. [5] en Is displayed on the screen, a ‘Cannot detach hard dk rn. hae matron te © If the “AB appears on the screen, check the camera a Video recording b In progress. connection.
Chapter 3: Getting Started 3.4.2 Virtual Keyboard ‘The virtual keyboard automatically appears on the screen if data entry is required. cE] Typed characters are: displayed here. Cll to delete a character. Click to enter the text. Chick to toggle the keyboard to upper case. 3.4.3 Locking the Screen For system security, lock the screen to protect unauthorized OSD operation. Lin the preview mode, right-click on the mouse to display the Pop-up menu. 2 Select Man Mani > SYSTEM. 3 Click ins tab.
Chapter 3: Getting Started 6 Enter the user name and password. Then, cock App Password must be 6 characters) Lakota Bollocks the screen, right cock to splay the Pop-up men end select Lock. LIES 19 once the leek futon I activated, you heed to enter the user name and password before entering the OSD men. virtual keyboard automatically appears on the screen. Enter User Name 3.4.
Chapter 3: Getting Started 3.4.5 On Screen Display {0SD) menu You can access the OSD menu by one of the following ways: & « Right lick on the mouse and select Milan Men. = «Press the MENU button on the remote central, then select Main Menu i Press the Menu key on the front panel, then select Main Mani.
Chapter 3: Getting Started 3.5 Screen Modes 3.5.1 Live View By daft, ll channels ara disputably on the sweeten Ingrid farm. To view Ive Image of any channel on ful screen, simply double-dick the let mouse button. Double-clothe lek mouse button again ta tum to the window-lpiay of al cameras.
Chapter 3.5.2 Split Mode You can customize the channels to be displayed separately on a 4/9/16 winnow on the screen. ‘hers are 3 split mode options: in the preview mode, right-click on the Mouse to dystopia the pop-up men. 2 select one of the following options: = View 4: Click ths con to view 4 channel at a time, Cl ck again 1 View the nex & channels al so on Alibi on 48/1BCH. Via 3: Click this con to view 3 channels ata time. Click again 1 view tha nie batch of channels foals on §418CH).
Chapter 3: Getting Started 3.6 Using PTZ Controls You are using a PTZ speed dome camera, you can configure the PTZ control settings. cE] Lin the preview mode, right-clck on the mouse to display the Pap-up menu. elect P12. on: This option Is nat available f the PTZ camera I In Cruse mode. See %.5.2 FT2 Setup an page 58. 3 The PTZ control anal appears on the scream. rote: To change the PTZ settings, ses "4.5.2 PTZ Setups” on pag 56. Shanna Select | Click to salacity tha channel of the PTZ camera.
Chapter 3: Getting Started 3.6.1 Cruise Mode Use the start ruse function t allow the PTZ mare to srt cls. 1 in the preview mode, it. dick on the mouse to display the Pop-up menu. 2 select Sur Rue, Ts durable rub: 1 Right-ck on the mouse ta display the Pop-up menu. 2 Select ap Cree. 3.7 Zoom With this function, You can check the detail of the Ive spillway on the zoomed section, 1 Double-click the mouse bun on a channel to view Kon ful screen. 2 Right-click on the mouse to display the Pop-up menu. select zoo.
Chapter 3: Getting Started 3.8 Manual Recording With this function, you can manually record the video. The system wil continuously record the video ntl you manually stop the recording. To enable manual recording: 1.1n the preview mode, rght:dlick on the mouse to display the Op-up menu. cE] 2 Select Start Record, The video recording starts. To stop the manual recording: 1 Rights click on the mouse to display the Pop-up mem. 2 Select Stop Record. The video recording stops.
Chapter 4: Using the DVR Chapter 4: Using the DVR 4.5 Setting the Display ‘With the DISPLAY men. you can adjust the display settings site es channel type, window potion, color, enable ive time set the piracy zone, and other stings. The DISPLAY menus divided Ino three sections: * Live: To configure how you want the channel appear on the hve view scream. * Output: To configure the video stings. © Privacy Zola: To mask areas on your camera as private zones. 4.1.
Chapter 4: Using the DVR 4.1.2 Output Settings “Li the preview mos, right click an tha nous tm dey the Pop-up man. nectarine Mensa [EE > DISPLAY, then select the Output tab. Moody the necessary settings: 0D To set the video aut sting af the main me ear sad for ve view diploid. View sump Select Enable 1 mab view setup. Notes ‘Wuhan View Setup x arable, Spl Windows function rot svelte (sme “3.5.2 Spit oie” ar pgs 341.
Chapter 4: Using the DVR 4.1.3 Privacy Zone Settings WATS 1 hie rum berg view on the sce. Lin preview mode, right-click on the mouse to display the Pop-up menu. 2 select Main Mort EEF > DISPLAY, select the Privacy Zone tab. 3 In Clone, satiety the channel that you wart t set the pray. Ain Privacy Zor, ssc Enable. 5 In Ara Saab, check the number of ares 0 mask. You can check Area 180 Area ts crusts § mashed naan. 6 Chk Cutup. Tha green bes Indicates the area for masking. .
Chapter 4: Using the DVR 4.2.2 Schedule Recording Lin previews moe, acc on tha mouse day the Pop-up main. 2 select Main Mensa E23 > RECORD, then select the Duteous ab. 3 0n Crane, suo the Chan you wart cotes the schedule. 40n Weak select the days of the week to Implement the schedule. 5 The number labels on top of the gid Indicates the tie of the day. ick a bax to mark the schedule.
Chapter 4: Using the DVR 7 Amer all settings are complete, dick App. name = Supply th curs sings to other days, sel the diy, than dick ADR. « Supply the cuter settings 1 thee channel, select the channel, then click Apply. 8 When det saving ks complete, lick OK. 4.2.3 MAIN STREAM Lin preview mode, right-clck on the mouse to display the Pop-up menu. 2 select Main Mar FH > RECORD, then select the Man stream tab. The Frame rate settings are displayed ona ‘ble, 3.0n Soda, select th type of card mod.
Chapter 4: Using the DVR 4.3 Searching Videos 4.3.1 Searching and Playing Videos Lin preview mode, right-click on the mouse to display the Pop-up menu. 2 solo ct Main Menu JET > seance. 30n CH, select the channel where vou want to search the recorded video, or select Aldo search all channels. ED = 4 Click the Search Data box and specify the date where you want to search the recorded video. 5 Click Search, The time slot of the recorded videos are marked on the Record State table.
Chapter 4: Using the DVR 7 Select the channels) to lay simultaneous. are Electoral channels, cock AL « To deselect al channels, click Gear. 8 Click Play o start payback. ‘The playback screen varies depending on the number of channels yo selected for simultaneous playback. Examples below: Simultaneous Playback of 8 Channels Simultaneous Playback of 4 Channels = —T Tami Drama 97 pay In full screen, pickax channel 10. Chck the respective tin pause, rewire, fast forward, matey the scud.
Chapter 4: Using the DVR Options: 34 Hours, 2 Hus, 1 Hair, 30 Minutes, and Customize roe frame (Click tha cn (E25), and the con tums bus G5) CA ck on the time lar wharf you desire tr start, and click an the time bar again whets you desire 10 und) 11 To stop the video playback, dido. 43.2 Trimming Videos 1 Galumph USB musical Into the USE port of the DVR. is aro tho US storage lo Pg 12th LSE pot on the beck of DVR. 2 in preview mods, right-cick an the mouse tn display the Pap-up many.
Chapter 4: Using the DVR 11 A confirmation message appears on the screen, select Backup to save the fle. Sa cE] hom: Do not remove the USB device while file transferring is In progress. Repaying Videos by Recording Date and Time you are sure of the recording date and time, you can directly specify the recording date and time to replay the video ‘without searching. “Lin preview mode, right click on the mouse to display the Pop-up men. 2 Select Main Mani £53) > seance.
Chapter 4: Using the DVR 6 Sal act tha channels) t play simultaneously. ED = “TPs « To select all channels, dick AN. To deselect all channels, cock Clear. 7 Click Play 10 start playback. 4.3.3 Searching Videos by Event Lin preview mode, right-dick on the mouse to display the Pop-up menu. 2 select Main Menu (23) > SEARCH, dick the Event Search tab. 3 0n Search Date, specially the recording date. 4.0n Search Tine, specify the starting time and the ending time to search for the event.
Chapter 4: Using the DVR 4.3.4 Backing up Videos hiphuggers USB destine Int the USB port of the IVR. is aro tha USB storage ISB pot on the beck fa DNR. 2 in preview mode, right-clck on the mouse to display the Pop-up menu. 3 select Man Mrs E38 > SEARCH, select the Event search tah, 4 On Search Eats, specify the cording date. 5 On Search Tami, specify tha starting time and the ending time to filter the search. 6.0110, sac th channel o search, or select Aldo search ll Chanel.
Chapter 4: Using the DVR 4.3.5 Viewing and Exporting Log hiphuggers USB destine Int the USB port of the IVR. (Make wre te USB rage Is pug i USE prt on he back fo DVR. Zin preview mode, right-click on the mouse to display the Pop-up menu. 3 detect Main Mar FH > seas, cock the Log ab. 4 0n Lag Ty pa, select one of the log types (Gallantry Operation). 5 Specify the Start Time and End Time to filter the list. 6 Click Search. All related log dies are displayed on the screen.
4.4 Setting the Network To enable remote monitoring, recording, playing, or configuring the setting via ROVE REMOTE LITE®, you need to configure the network settings first. Consult your Internet Service Provider {ISP) to determine the type of network connection you ara using and the required parameters to complaint the setup. 4.4.1 Network Settings Chapter 4: Using the DVR cE] You can use the Network menu to sat how the DVR connects to the network.
Chapter 4: Using the DVR specially the Lent Port and HTTP Port numbers. » Clam Part: Spec the part umber tht the device wil use ta send DVR command and video stream. = HTTP Port: Pacy tha port number that you wil um to log In to the device. Enos: + Obtain these Information from your network administrator or your Eminem Service Provider {ISP}. you cannot use the ether of the two default: ports, 80or 5000, the speckled port may be occupied by other programs irks being blocked by your service row der.
Chapter 4: Using the DVR 4.4.2 Remote Stream Setup ‘The Remote rsa page allows you to enable or call video output of a particular channel I the chant is being Viewed via remote access. Lin preview mods, right-cick an the mouse i display the Pap-up many. 2 saloon Main dar EEE] > NETWORK, sect the Su Sta tas. The aus strata amaranths ant tings am dismayed attain. 3 Select the channel ius the corresponding settings such as Vidal, FP, and Brats. 4 Check the Audio bax to enable aul.
Chapter 4: Using the DVR 7 To remove a marked schedule, dick the bax again. The bax turns bie. 8 after all settings are complete, click Apply. Bo « Topiary the current settings to other days, select the day then dick Apply. « Polythene current settings to otter channels, select the channel, then chick Apply. Wan data saving ts compel, click OK. 4.4.
ELL Chapter 4: Using the DVR 4.5 Stony Settings 4.5.1 Storage Device Setup “To ensure the hard disk drive Is properly set, It Is Important: to configure the hard disk drive settings before ts Initial usage. Far other external hard diva and SR Davies, I Is commandeered ta format haste davits fora thalami Initial usage. Setting HOD To set up the hard disk drive, do the following: Lin preview mode, right-dick on the mouse to display the Pop-up menu. 2 select Main Mensa (3) > ave Ten.
‘Chapter 4: Using the DVR Formatting USE drive “To format the USB disk drive, do the flowing: Plug a USB device into the USB port of the DVR. 21n preview mode, right-dick on the mouse to display the Pop-up menu. 3 select Main Menu [EZ > TOTEM select HOD ws. 8 lck Format Use. 5 An “Al data will be deleted after formatted” warming message appears on the screen. Click OK t proceed. 6 When the formatting process is complete, click OK. ote: Do not remove the USB device while drive formatting fs In progress. 4.5.
Chapter 4: Using the DVR ELL 4.5.3 Serial Setup Lin preview mode, right click on the mouse ta display the Pop-up menu, 2 select Main Menu [EE3) > SYSTEM select Serra tb. 3 When apart VR via keyboard, It is required to 3et communication proton. «Baud rhe: ot baud ate of serial communication. © Batu bit: sat data bt of sated communication, Bop bit set slop DIL. © Party Chick: set party check to or rifer. ote: allay in 16-channel Reverently. 4.
Chapter 4: Using the DVR Synchronizing Time with NTP Server 1 1n preview mode, right-click on the mouse to display the Pop-up menu. 2 select Main Peru SITE) > SYSTEM select General 3 In NTP, chick Setup. 4 0n Server Address, salacity tha NTP saver. 5 Sal act tha Tami Zon In your location. 6 On Enable, select Enable, dick ‘Update now” to allow the system to synchronize with an NTP server. 7 Click Apply to save the settings.
EE Chapter 4: Using the DVR 7 after all settings are complete, dick Apply. 8 When data saving ls complete, click OK. 4.5.5 User and Password Settings “The Users pag allows You ta change the password and author users end Set the Carcass Highs In using the DVR. ‘There Is one administrator account and 6 user accounts. By default, the administrator account's user name Is “admin” and the password is empty: Only the administrator account is enabled by default.
Chapter 4: Using the DVR 5 If you want to modify the user name, enter desired name In User Name column. 6 Select Enable in Password Enable. 7 lick the Password box to enter the password (see *3.4.2 Virtual Keybinding” 0 ae 30 for details on dung the virtual keyboard). Fore: The password must be 6 numbers In length, When you are using for mab application to view multiple channels In ragtime through on your manila Davies, attar tha samey user mama and password as you specified here.
Chapter 4: Using the DVR Authorizing Other Users Only the administrator can grant access rights to users. To set the access rights, you must login using an administrator ‘account, and then do the following: Lin preview mode, right-click on the mouse to display the Pop-up menu, ELL 2 select Main Menu [EE] > SYSTEM, select the Users tab. 3 Click the check bow of a user account, A icon appears. click Parisian. Mar 5 Select tha sack bos of the corresponding menu that you want to allow the user to access.
Chapter 4: Using the DVR 4.5.6 View System Info ‘The Version page allows you to configure the device name and ID, as well 2s view the MAC address, firmware version ‘and other system information. Lin preview mods, right-click on the Mouse to display the Pop-up men. 2 select Main Menu [E3)> SYSTEM, saloon tha into tab. ‘Dave Daren. | Ena dai nam for thn OV Tha ram can be compel of alphanumeric character, Soa 5.2 Vrs Reynolds” gaps 5 for details on using thou) Keyboard. Davao | Enter desired 0 for the OVR.
Chapter 4: Using the DVR 7. Sureness per 4.6 Advanced Settings ‘Ths Maritain gaps sows you to set automatic system maintenance, load factory defaults, pte the firmware settings, or reboot and power off the DVR manual. 4.6.1 Motion Detection Alarm Settings For acid security, enable the mason detection feature. When mason f detected on a select] wea, the DVR kus an alarm intoxication, Lost the motion detection alarm, do the following: “Lm previews mode, it cock on the mouse to display the Po-up men.
Chapter 4: Using the DVR Hymnal | sect tm cn 1 matron section. Berate | see Ensign are moon deacon som for he camel. Ava | Compass o eet he ardor matron section sm, See Se hon Dec Foe” fire) Sensitivity | Select the motion detection sensitivity rate. Options are : 1-3, wherein “8” ks the mast. sent and “1 lathe ss sense. Rl | hock 1s cri am ut ron, ty Sc whe DVR smc iol ar Gon we don Lois ow Stack om bra D234) a rm wr don Check the box 10 display a messages on screen when the alarm Ls brigand.
Chapter 4: Using the DVR For the DVRs with n connected alarm device, da th following to sat up the lama stings: Lin preview mode, gnt ALARM, succinct the Alarm tah. 3 Modify the necessary settings: [CTE He Marin | Select the channel hat wl rigger the aim. camel val 415 chamois vision heron mode. Nora Ty pa | Select tha alarm type: ND (korma-Opan), NC {Normal Close, or OFF.
Chapter 4: Using the DVR 3 Neanderthal following: Clk Shut Down 10 tum off the DVR. Clk Reboot to abut the DVR. @ Message appears, ck OK to confirm the operation. hoe: When ing of the DVR, wat for the messages "Now You can unplug the power!” 20 appear on the screen, tum off the powerhouse and then unplug the power cord from the power outlet. Disable Startup Viand ‘To prevent the Wir Setup screen appears every time the system iceboat, please disable Surtitle here.
Chapter 4: Using the DVR 5 click Aer. &hickory. Set Austria Strasbourg. Use this feature to automatically reboot the DVR on speckled schedule. When the DVR reboots, all stings and data are refreshed from the memory; which opiates the OVR performance. Ln preview mat, Hg ht elk on the mouse ta display the Pop-up mend. 2 Select Main Mar > SYSTEM > MAIN TAB, 3 Sat Auk Ru boot to Enable. 4 In Auk Ra boot, select the frequency reboot the DVI Options are: Err: Re bots he DVR an aby bats.
Chapter 4: Using the DVR 1 in pr dew mode, gimmick on the mae o dpa the Popup mend. 2 saint Male then SEER» advanced. 3 Cleveland Depute 4 Che tho checkbox of the stings tat you want restore. =Es © To restore ll settings, ick AL To electable al checked bones, Eck Car. * To encl clerk Cancel 'S Afr ail sayings are completes, cheek Apply. 6 Warning message sperm, cock OK to confirm. 7 When data saving ls complete, dick OK. Save Si stem Settings Use this feature to save the DVR current settings.
Chapter 4: Using the DVR 3 Select tin Mons (E> Accent, 4 Clk Loud Sottish. 5 When data partings complete, th stomp wil automate reboot. 4.6.4 Events Settings “The Eves page allows ou to define the type of vets fo he DVR 0 sue an alarm. “Lin preview mov, right-clck on the mouse to spay the Pop-up men. 2 Select Main Minn (E30 > DARNED, select the Evert tab, : 2 Moody the necessary stings, Brant Type | Select the Levant typ. Options «Disk Full: When HOO ks full = Disk ror HDD I not detected property.
Chapter 5: Troubleshooting & FAC Chapter 5: Troubleshooting & FAQ 5.1 Troubleshooting you experience any problems In using the DVR, try the following solutions £ these conman problems before calling for service. If problems persist, contact the customer service In Your area. “The DV dons not tum ba = Check f the prewar adapter s properly catatonic and the maddest not. | + Hag the power cord to bother power outer the current outer may be damaged.
Chapter 5:Troubleshooting & FAQ ‘Check ff the network cable Is properly connected tithe DVR. ‘Check If the network settings are property configured. Ses “4.4 Setting the Hetwerk® on page 52. Aka sure the mobile dace nutty Is property Installed an your mole phone. © Aka aura that tha mobile server port vassal ks the sam as the value set In the DVR menu. I cannot recess the DVR through my mobile phone. a EL] 5.
