User`s guide

Setting Thresholds
40 M1 System Management Board User’s Guide
Setting the Thresholds with the Slider Marker
1. Click the Thresholds tab.
2. Select the part for which you wish to alter the threshold levels.
3. Set the Lo-Warn and Hi-Warn levels as desired.
4. Set the Lo-Limit and Hi-Limit levels as desired.
Figure 4-2. Setting Thresholds by Slide Marker
Voltage, Current, and Temperature Status Indicators
The following explains the voltage, current, and temperature status indicators found in the Board Status tab next to each
reading.
Red - Voltage, current, or temperature is above the maximum or below the minimum.
Green - Voltage, current, or temperature is within set range.
Yellow - Voltage, current, or temperature is between maximum and local maximum or between minimum and local
minimum.