Operating Manual EConnect™ TA7210 Wireless Programmable/Non-programmable Thermostat 69-2473EF-01
Operating Manual Before you begin Do you know your thermostat configuration? To know whether your new thermostat is configured in programmable mode or non-programmable mode, look for the time and day display on the thermostat screen. If the time and day appear on the screen, the thermostat is configured as a programmable thermostat. Refer to the table of contents on the next page for sections that apply to your thermostat configuration. Need Help? For assistance with this product please visit www.
EConnect™ TA7210 Table of contents Non-programmable configuration Programmable configuration Basic operation Thermostat display in non-programmable mode.................................4 Setting the temperature........................................................................5 Countdown mode (Décompte).............................................................6 Programmable mode Thermostat display in programmable mode..............
Operating Manual Thermostat display in non-programmable mode If your thermostat is configured in programmable mode, see more description on page 8. Heating Indicator The number of flames depends on the heating intensity. The image disappears when heating stops. Indoor temperature (room temperature) Set temperature Lock The thermostat settings are totally or partially locked. Outdoor temperature (requires outdoor sensor) button Press to decrease the temperature.
EConnect™ TA7210 Setting the temperature Set temperature Press or to set the temperature.
Operating Manual Countdown mode Press Décompte (Countdown) to set a new temperature and to select the time you wish to hold this temperature setting. The thermostat will return to its previous or programmed temperature setting at the end of the countdown time. The countdown time is selectable from 15 minutes to 14 days. The Countdown mode is not available when the thermostat is locked. 1 Press Décompte. 69-2473EF—01 2 Select the countdown time. 6 3 Set the temperature.
EConnect™ TA7210 Countdown mode (cont’d) The countdown time changes in real time to show the remaining time. Press Annuler any time to cancel the Countdown mode. You can change the countdown time and temperature any time.
Operating Manual Thermostat display in programmable mode The thermostat displays the current time and day when the thermostat is configured in programmable mode. When the thermostat is following the schedule, it also displays the current period of the schedule: Réveil (Wake), Départ (Leave), Retour (Return) or Sommeil (Sleep). The period is not displayed when the thermostat is placed in Maintien temporaire (Temporary Hold) or Maintien permanent (Permanent Hold).
EConnect™ TA7210 Following the heating schedule Exécute l’horaire (Run Schedule) appears on the screen when the thermostat is following the programmed schedule. Your thermostat has been programmed with an energy-saving schedule which can reduce your heating expenses by as much as 33%. Monday to Friday (Lu, Ma, Me, Je & Ve) Period Réveil (Wake) Starting time Temperature Saturday and Sunday (Sa & Di) Starting time Temperature 6h (6:00 AM) 21.0°C (70°F) 8h (8:00 AM) 21.
Operating Manual Setting the time and the date * 1 Press Menu. 2 Select Date & heure. 3 Set the hour. 4 Set the minutes. * Copy will appear only if the thermostat is linked to a remote control or an outdoor sensor.
EConnect™ TA7210 Setting the time and the date (cont’d) 5 Set the year. 6 Set the month. 7 Set the day of the month. 8 Enable/disable Automatic Daylight Saving*. * When this function is enabled, the thermostat switches to daylight savings time on the second Sunday of March and to normal time on the first Sunday of November. When the function is disabled, the thermostat keeps the normal time all year long.
Operating Manual Modifying the heating schedule 1 Press Menu. 2 Select Horaire. 3 Select the day or the group* you wish to modify. 4 Select the period you wish to modify. * The groups are: Lu-Ve (Monday-Friday), Sa-Di (Saturday-Sunday), and Lu-Di (Monday-Sunday). Selecting a group will apply the changes to all the days within that group.
EConnect™ TA7210 Modifying the heating schedule (cont’d) 5 Set the time (15-minute intervals). 6 Set the temperature. 7 Select another period or press Sortir to go to the day selection menu (step 3). 8 When all changes are done, press Sortir until you return to the home screen. If you wish to clear a period (e.g. you may want to skip the Leave and Return periods if you stay home all day), select the period (step 4) and press and simultaneously.
Operating Manual Temporary Hold (Maintien temporaire) Use Temporary Hold (Maintien temporaire) mode to temporarily bypass the schedule and set a new temperature. The thermostat will hold the new temperature during the current period. The thermostat will resume the heating schedule when the next period starts or if you press Annuler (Cancel). 1 Press or until the desired temperature is displayed. 69-2473EF—01 2 Press Temporaire 14 3 At any time, you can press Annuler to follow the schedule.
EConnect™ TA7210 Permanent Hold (Maintien permanent) Use Permanent Hold (Maintien permanent) mode to bypass the schedule and set a new temperature for an indefinite period of time. To resume the heating schedule, press Annuler (Cancel). 1 Press or until the desired temperature is displayed. 2 Press Permanent. 15 3 At any time, you can press Annuler to follow the schedule.
Operating Manual Copying the heating schedule Use the Copie function to transmit the schedule settings of this thermostat to other EConnect™ wireless thermostats in your house. This function is available only if the thermostat is connected to a remote control or to an outdoor sensor. The schedule settings are transmitted to any other thermostats connected to the same remote control or outdoor sensor. 1 Press Menu. 69-2473EF—01 2 Select Copie. 16 3 Press OK.
EConnect™ TA7210 Copying the heating schedule (cont’d) 4 Patientez flashes when the schedule settings are transmitted to the other thermostats (this can last up to 2 minutes). 5 SUCC appears when the transmission is completed. 17 6 Press Sortir twice to return to the home screen.
Operating Manual Advanced setup Setup functions * Default setting Options Temperature and time formats * °C °C / °F 24h 12h / 24h Programmable mode (Horaire) ** On (Oui) On/Off (Oui/Non) Adaptive Intelligent Recovery (Horaire Anticipé) *** On (Oui) On/Off (Oui/Non) You can set the temperature display unit in °C or °F. You can set the time display format in 12-hour or 24-hour (military time) if the thermostat is in programmable mode.
EConnect™ TA7210 Accessing the advanced setup menu Press this button for 5 seconds to access the advanced setup menu. °C / °F * Advanced setup menu 12h / 24h * From the advanced setup menu, press or to select the setup functions and press OK. Programmable mode Adaptive Intelligent Recovery * These parameters are available only if the thermostat is configured in programmable mode.
Operating Manual Replacing the batteries Thermostat Install 2 new alkaline AA batteries when the Piles faibles (Low batteries) warning starts flashing. It is recommended to replace batteries once a year, or when you will be away for more than a month. To access the batteries, pull the thermostat from its mounting plate. You will need to set the time and date if new batteries are not inserted within 2 minutes after the old ones are removed. However, other settings are not erased.
EConnect™ TA7210 In case of difficulty / Error codes Heating system does not respond • Check circuit breaker and reset if necessary “Signal Perdu” appears on the screen • The thermostat has lost communication with the wireless network (usually due to power outage). Otherwise, check circuit breaker and reset if necessary. When power is restored, the wireless communication will be restored within a few minutes. The thermostat displays “LO” • The indoor temperature is below 0°C (32°F).
Operating Manual Three-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
EConnect™ TA7210 Regulatory information FCC Compliance Statement (Part 15.19) (USA only) to which the receiver is connected. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • Consult the dealer or an experienced radio/TV technician for help.
Automation and Control Solutions Honeywell International Inc. Honeywell Limited 1985 Douglas Drive North 705 Montrichard Golden Valley, MN 55422 Saint-Jean-sur-Richelieu, Quebec, J2X 5K8 http://yourhome.honeywell.com www.aubetech.com 69-2473EF-01 06-11 © 2011 Honeywell International Inc. ® U.S. Registered Trademark. All rights reserved.
Mode d’emploi EConnectMC TA7210 Thermostat programmable/non-programmable sans fil 69-2473EF-01
Mode d’emploi Avant de commencer Savez-vous la configuration de votre thermostat ? Pour savoir si votre nouveau thermostat est configuré en mode programmable ou en mode non programmable, vérifier si l’heure et le jour sont affichés à l’écran. S’ils apparaissent, cela signifie que le thermostat est configuré comme un thermostat programmable. Se référer à la table des matières sur la page ci-contre pour les sections qui s’appliquent à la configuration de votre thermostat.
EConnectMC TA7210 Table des matières Configuration non programmable Configuration programmable Utilisation de base Affichage en mode non-programmable...............................................4 Réglage de la température...................................................................5 Mode Décompte...................................................................................6 Mode programmable Affichage en mode programmable.....
Mode d’emploi Affichage en mode non-programmable Si votre thermostat est configuré en mode programmable, voir plus de description à la page 8. Indicateur de chauffage Le nombre de flammes dépend de l’intensité du chauffage. L’image disparaît lorsque le chauffage s’arrête. Température intérieure (température de la pièce) Température de consigne Verrouillage Les réglages du thermostat sont complètement ou partiellement verrouillés.
EConnectMC TA7210 Réglage de la température Température de consigne Appuyer sur ou 5 pour régler la température.
Mode d’emploi Mode Décompte Appuyer sur Décompte pour régler une nouvelle température et de sélectionner la durée de maintien de la nouvelle température. Le thermostat retournera à son réglage de température précédent ou programmé à la fin du compte à rebours. La période de décompte est réglable de 15 minutes à 14 jours. Le mode Décompte n’est pas accessible lorsque le thermostat est verrouillé. 1 Appuyer sur Décompte. 69-2473EF—01 2 Sélectionner le compte à rebours. 6 3 Régler la température.
EConnectMC TA7210 Mode Décompte (suite) Le compte à rebours change en temps réel pour indiquer le temps restant. Appuyez sur Annuler en tout temps pour annuler le mode Décompte. Vous pouvez modifier la période de décompte et la température en tout temps.
Mode d’emploi Affichage en mode programmable Le thermostat affiche l’heure et le jour lorsqu’il est configuré en mode programmable. Lorsque le thermostat suit l’horaire de chauffage, il affiche aussi la période en cours: Réveil, Départ, Retour ou Sommeil. La période n’est pas affichée lorsque vous placez le thermostat en Maintien temporaire ou en Maintien permanent.
EConnectMC TA7210 Utilisation de l’horaire de chauffage Le message Exécute l’horaire apparaît à l’écran lorsque le thermostat suit l’horaire programmé. Un horaire écoénergétique a été programmé dans votre thermostat, vous permettant ainsi de réduire votre facture d’électricité jusqu’à 33%. lundi à vendredi (Lu, Ma, Me, Je et Ve)) Période Réveil Heure du début Temperature samedi et dimanche (Sa et Di) Heure du début Temperature 6h (6:00 AM) 21.0 °C (70 °F) 8h (8:00 AM) 21.
Mode d’emploi Réglage de l’heure et du jour * 1 Appuyer sur Menu. 2 Sélectionner Date & Heure. 3 Régler l’heure. 4 Régler les minutes. * La fonction Copie n’apparaît que si le thermostat est relié à une télécommande ou une sonde extérieure.
EConnectMC TA7210 Réglage de l’heure et du jour (suite) 5 Régler l’année. 6 Régler le mois. 7 Régler le jour du mois. 8 Activer/désactiver l’heure d’été automatique*. * Lorsque cette fonction est activée, le thermostat passe à l’heure d’été (avancée) le deuxième dimanche de mars et à l’heure d’hiver (normale) le premier dimanche de novembre. Lorsque la fonction est désactivée, le thermostat reste à l’heure normale à l’année longue.
Mode d’emploi Modification de l’horaire de chauffage 1 Appuyer sur Menu. 2 Sélectionner Horaire. 3 Sélectionner le jour ou le groupe* à modifier. 4 Sélectionner la période à modifier. * Les groupes sont: Lu-Ve, Sa-Di et Lu-Di. Lorsque vous sélectionnez un groupe, les changements seront apportés à tous les jours du groupe.
EConnectMC TA7210 Modification de l’horaire de chauffage (suite) 5 Régler l’heure (intervalles de 15 minutes). 6 Régler la température. 7 Sélectionner une autre 8 Une fois tout période ou appuyer sur changement fait, Sortir pour passer au appuyer sur Sortir menu de sélection du jusqu’à ce que vous jour (étape 3). reveniez à l’écran d’accueil.
Mode d’emploi Maintien temporaire (Temporary Hold) Utiliser le mode Maintien temporaire pour déroger temporairement à l’horaire en réglant une nouvelle température. La nouvelle température sera maintenue pendant la période en cours. Le thermostat retournera à l’horaire de chauffage lorsque la période suivante débutera ou si vous appuyez sur Annuler. 1 Appuyer sur ou jusqu’à ce que la température désirée soit affichée. 69-2473EF—01 2 Appuyer sur Temporary.
EConnectMC TA7210 Maintien permanente Utiliser le mode Maintien permanent pour déroger à l’horaire et régler une nouvelle température pendant une période indéfinie. Pour revenir à l’horaire de chauffage, appuyez sur Annuler. 1 Appuyer sur ou jusqu’à ce que la température désirée soit affichée. 2 Appuyer sur Permanent. 15 3 En tout temps, vous pouvez appuyer sur Annuler pour revenir à l’horaire.
Mode d’emploi Copie de l’horaire de chauffage Utiliser la fonction Copie pour transmettre l’horaire du thermostat aux autres thermostats sans fil EConnectMC de votre résidence. Cette fonction n’est disponible que si le thermostat est relié à une télécommande ou une sonde extérieure. Les réglages de l’horaire sont transmis à tout autre thermostat relié à la même télécommande ou à la même sonde extérieure. 1 Appuyer sur Menu. 69-2473EF—01 2 Sélectionner Copie. 16 3 Appuyer sur OK.
EConnectMC TA7210 Copie de l’horaire de chauffage (suite) 4 Patientez clignote pendant que les réglages de l’horaire sont transmis aux autres thermostats (cela peut durer jusqu’à 2 minutes). 5 SUCC apparaît une fois la transmission complétée. 17 6 Appuyer deux fois sur Sortir pour revenir à l’écran d’accueil.
Mode d’emploi Fonctions avancés Fonctions de configuration Réglage par défaut Format de la température et de l’heure* Options °C °C / °F 24h 12h / 24h Mode programmable (Horaire)*** Oui Oui / Non Horaire Anticipé** Oui Oui / Non * Vous pouvez choisir d’afficher la température en ° C ou ° F. Vous pouvez choisir afficher l’heure en format 12 heures ou format 24 heures si le thermostat est en mode programmable. ** Accessible seulement lorsque vous utiliser le thermostat en mode programmable.
EConnectMC TA7210 Menu des fonctions avancés Appuyez sur ce bouton pendant 5 secondes pour accéder au menu des fonctions avancés. °C / °F * Menu des fonctions avancés 12h / 24h * Dans le menu des fonctions avancés, appuyez sur ou pour sélectionner les fonctions avancés et appuyez sur OK. Mode programmable Horaire Anticipé * Ces paramètres ne sont disponibles que si le thermostat est configuré en mode programmable.
Mode d’emploi Remplacement des piles Thermostat Installer 2 piles alcalines AA neuves lorsque l’avertissement Piles faibles se met à clignoter à l’écran. Il est recommandé de remplacer les piles une fois par an, ou lorsque vous vous absentez pendant plus d’un mois. Pour accéder aux piles, tirer le thermostat de son socle. Vous devrez régler l’heure et la date si de nouvelles piles ne sont pas insérées dans un délai de 2 minutes après que les vieilles piles soient enlevées.
EConnectMC TA7210 En cas de difficulté / Codes d’erreur Le système de chauffage ne répond pas • Vérifier le disjoncteur et le réenclencher au besoin. “Signal Lost” apparaît à l’écran • Le thermostat a perdu la communication avec le réseau sans fil (habituellement après une panne de courant). Sinon, vérifier le disjoncteur et le réenclencher au besoin. Une fois l’alimentation rétablie, le thermostat communiquera automatiquement avec le réseau sans fil au bout de quelques minutes.
Mode d’emploi Garantie limitée de 3 ans Honeywell garantit ce produit, à l’exception des piles, contre tout vice de fabrication ou de matière dans la mesure où il en est fait une utilisation et un entretien convenables, et ce, pour trois (3) ans à partir de la date d’achat par le consommateur. En cas de défectuosité ou de mauvais fonctionnement pendant la période de garantie, Honeywell remplacera ou réparera le produit (au gré de Honeywell).
EConnectMC TA7210 Information sur la réglementation Déclaration de conformité à la FCC (partie 15,19) (États-Unis seulement) Cet appareil est conforme à la Partie 15 des règles de la FCC. Le fonctionnement de ce système est assorti aux deux conditions suivantes : 1) L’appareil ne peut causer d’interférences nuisibles, et 2) L’appareil doit accepter les interférences reçues, y compris celles qui pourraient nuire à son fonctionnement.
Automation and Control Solutions Honeywell International Inc. Honeywell Limited 1985 Douglas Drive North 705 Montrichard Golden Valley, MN 55422 Saint-Jean-sur-Richelieu, Quebec, J2X 5K8 http://yourhome.honeywell.com www.aubetech.com 69-2473EF-01 06-11 © 2011 Honeywell International Inc. ® Marque de commerce déposée aux É.-U. Tous droits réservés. Imprimé aux É.-U.