Installation manual

6
Installing the ATEO
Clevermount™ Technology
Every Ateo speaker uses the unique Clevermount™ technology, making the loudspeakers
cabinet flow together with the mounting bracket and providing a great ease for installing
the loudspeaker in one good-looking entity.
Using this technology, the speaker can be installed at any location in both a horizontal and
vertical way, providing the possibility for pointing the speaker into the desired direction,
even after the speaker is already mounted and connected.
The horizontal installation method provides an additional advantage when the installation
height on the wall or ceiling is limited, while the directional capabilities make it easy to
determine and adjust the distribution of sound throughout the area.
The installation of the loudspeaker should be done according to a simple 5-step
procedure, which is described below:
Step 1: Attach the Wall Plate
The first step which should be taken is the mounting of the supplied wall plate to the
desired location on the wall. The wall plate has to be fixed by four screws in a quad-
rangular shape. The mutual distance is 30 mm horizontally and 55 mm vertically for
the ATEO4 and 50 mm horizontally and 50 mm vertically for the ATEO6 as indicated in
the following drawing. The used fasteners should be chosen depending to the mounting
surface (brick, concrete, wood, ... )
C 24 W 12 W 6 W 3 W
ATEO 4
Clevermount™
ATEO 6