CMP30 User Manual www.audac.
Index Introduction 4 Precautions 5 Chapter 1: Pin connections and connectors 7 Connection standards 7 Chapter 2: Front & rear panel 8 Safety requirements Caution servicing EC Declaration of Conformity Waste of Electrical and Electronic Equipment (WEEE) Caution Class 1 laser product 5 5 5 6 6 6 Front panel overview Front panel description Functions overview Rear panel overview Rear panel description 8 8 11 13
Introduction Digital audio source - CD, MP3 & Tuner The CMP30 is an All-In-One audio source device which accommodates three different kinds of audio sources into one single device. It combines a CD-Player, MP3-player and AM/FM tuner into one single rack space 19” housing. On the front side is a CD slot, an USB slot and a SD/MMC memory card slot provided. This makes it possible to play regular audio CD’s as well as MP3 files from either CD’s, USB memory sticks or SD/MMC memory cards.
Precautions READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY ALWAYS HANDLE THIS UNIT WITH CARE HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE. DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS ADEQUATE VENTILATION TO COOL THE UNIT.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) The WEEE marking indicates that this product should not be disposed with regular houshold waste at the end of its working life. This regulation is created to prevent any possible harm to the environment or human health. This product is developed and manufactured with high quality materials and components which can be recycled and/or reused. Please dispose this product to your local collection point or recycling centre for electrical and electronic waste.
Chapter 1 Pin connections and connectors CONNECTION STANDARDS The in- and output connections for AUDAC audio equipment are performed corresponding to international wiring standards for professional audio equipment.
Chapter 2 Front & rear panel Front Panel overview Front panel description Function rotary dial (FUNCTION): The function rotary dial allows to switch the device between Tuner, CD or USB & SD/MMC operation mode by pressing a short term. It will switch between the several modes in this sequence. By rotating this dial, the output volume for the ‘Variable audio output’ can be adjusted. By pressing and holding this button, the playback mode will be switched between ‘Single Play’ and ‘Normal Play’ mode.
Play / Pause button (PLAY/PAUSE): • CD, USB & SD/MMC mode: Press: The music from the CD or USB & SD/MMC can be started and paused with this button. When a track currently is playing, it will be paused after pressing this button and the current position (Track no and time) will be shown on the display. It will resume to play after pressing this button again. • Tuner mode: Press & Hold: By pressing and holding this button, the current chosen radio frequency will be stored on ‘Position 1’ of the selected band.
Press & Hold: By pressing and holding this button, the position in the currently playing track can be selected (forward). After the button is released the track will resume to play from this point. • Tuner mode: In tuner mode, the desired radio station can be selected with this button. Press: By pressing this button one single time, the next radio station will be searched in auto seek mode, and when used in manual seek mode the selected frequency will increase one step.
Search up (DIR +): • CD, USB & SD/MMC mode: Press this button to jump to a higher folder. • Tuner mode: Press: Press this button in tuner mode to select the next programmed radio preset. Press & Hold: By pressing and holding this button, the current chosen radio frequency will be stored on ‘Position 6’ of the selected band. Random play (RAND): • CD, USB & SD/MMC mode: Press this button to switch the random play mode (Shuffle) On and Off.
Control Operation mode Action Function Press Change between Tuner / CD / SD/MMC Operation mode All modes Rotate Change output volume for variable output All modes Press & Hold Change playback mode between single play and normal play CD Eject button All modes Press Play/Pause button CD, USB & SD/MMC Press Function rotary dial All modes Tuner Stop button Rewind button Pause & Resume to play the current track Press & Hold Store current chosen radio frequency on Position 1 CD, USB & SD/MMC P
Rear Panel overview Rear panel description Power inlet: The mains power supply (110~240V AC / 50~60 Hz) has to be applied to this AC power inlet. The connection is made by an IEC C14 power connector which is fitted with a fuse. When replacing the fuse, make sure that the value of the replacement fuse matches the value of the original fuse.
Chapter 3 Quick start guide The CMP30 player is designed for installation into a rack (482 mm / 19”) with a height of one single rack space (44.45 mm), but it can also be placed as a desktop unit. Before using the device, the connections of the CMP30 should be made properly. The audio output connections should be made with the RCA/Cinch connectors on the rear side of the device. depending of the application, the variable either the fixed Audio outputs (or both) should be used.
Chapter 4 Additional information Technical specifications Inputs Audio compact disk slot (12 cm) USB Memory stick input SD/MMC Memory card input Control Front panel RS232 Outputs 2 x Fixed audio output (Tuner & CD/MP3) 1 x Variable audio output (Selectable) Frequency range FM MW 87.5 ~ 108 MHz 522 ~ 1620 kHz Channel step FM MW 50 kHz 9 kHz Intermediate frequency FM MW 10.
Notes 16