User manual

Chapter 4

User interface & configuration

Togainaccesstothecontrolandconfigurationsettings,theM2shouldbeconnectedtoa

computeroranEthernetLANnetwork.Formoreinformationaboutnetworkconnections

andsettings,seeIPbasicsinchapter9.

Thestandard(factorydefault)IPaddressoftheM2is192.168.0.190,makesurethis

addressiswithintheIPrangeoftheconnectedEthernetLANnetwork(subnetmask

255.255.255.0).IfthedefaultnetworkaddressisnotwithinrangeofyourLANnetwork,

contactyournetworkspecialist.ThenetworkaddresscanbechangedwiththeStandard

WebBasedUserInterfacebutthereforeanetworkconnectionhastobemadefirst!

Anydevice(PC,Laptop,...)withawebbrowserandtheAdobeFlashPlayer9.0(or

higher)canbeusedtocontroltheM2webbaseduserinterface.

Theflashplayercanbedownloadedfromhttp://get.adobe.com/flashplayer/

Formobiledevices,suchasPDA’s,smartphonesoreveniPhonesoriPads,special

applicationsaredevelopedtocontrolthestandardfunctionsoftheM2Mixer.

Open the user interface

Start your default web browser and enter in the address bar the IP address of the embedded web

server of the M2. (The factory default IP address is http://192.168.0.190).

Firsttheloginscreenwillbedisplayed.

ApasswordshouldbeenteredtogetaccesstothewebinterfaceoftheM2mixer.

Therearetwodifferentaccesslevels,administratorlevelanduserlevel.

M2 Login