User manual

21
Ifyoulog-inusingtheadministratorpassword,yougetaccesstoallfunctionsand
configurationoptionsoftheM2Mixer(Thefactorydefaultpasswordforadministrator
accesis‘M2’).
Whenyoulog-inusingtheuser password,youonlygetaccesstothebasicfunctions
oftheM2mixer,suchaschangingthevolumeandchangingthemixingforaparticular
outputzone.(Thefactorydefaultpasswordforuseraccesis‘user’).
Aftertherightpasswordisentered,clickthe‘OK’button,andyouwillberedirectedtothe
mainscreenoftheM2interface.
NOTE
ThepasswordscanbechangedintheSettings>>Systemconfiguration>>Password
settingsmenu(Onlyadministrator)
Main screen
Themainscreengivesanoverviewofalltheoutputs,withavolumecontrolfader,amute
buttonandaninputselectiondropdownlistforeveryzone.Atadministatorlevel,some
additionalfeaturesareprovidedsuchasa‘Settings’buttonforeveryoutputtoproceed
tothatoutput’soutputsettingswindowanda‘Setup’buttontoproceedtothegeneral
settingsmenu.
M2 Main screen (Administrator level)
Volume control
Thevolumeofeachoutputchannelcanbesetbymovingthefaderofthecorresponding
channelupordown.Atthetopandbottomsideofeachfaderisabuttonwithanarrow
displayedwherebythevolumecanberaisedorloweredinstepsof1dB.Atthebottomis
a‘Mute’buttonprovidedwhichmutesthevolumeofthecorrespondingoutputchannelin
oneclick.Afterthevolumeismuted,thebuttonwillbecomeRed.Tounmute,justpress
thebuttonagain.