User manual

22
Assign zone names
Forabetteroverviewofalloutputchannels,eachfadercanbeassignedbyaspecific
outputname.Thenameoftheoutputcanbechangedbyclickingonthenamewhichis
displayedabovethecorrespondingfader.Whenacursorcomesup,removetheexisting
namewiththebackspacekey,andjustchangethenameinthedesiredname.Clickonthe
‘SaveOutputSettings’buttonandconfirmtosavethechangedoutputsettings.Thename
ofthecorrespondingoutputwillbechanged,andnexttimeyoulogintothewebbased
interface,thesameoutputnameswillbedisplayedautomatically.
Connection status
Inthetopleftcornerofthewindowisthe‘ConnectionStatus’displayed.Thisstatusis
‘ONLINE’whencommunicationwiththeM2isachieved.Innormaloperation,thestatus
‘ONLINE’willbeindicatedingreen.Whenthestatus‘ONLINE’isshowninorange,it
meansthecommunicationwiththedevicewasinterruptedbutisrestorednow.Whenthe
status‘OFFLINE’isshowninred,itmeansthereiscurrentlynocommunicationwiththe
device.
Input channel / scene selection
Thedesiredinputsignalforaparticularoutputcanbeselectedusingthedropdownlist
belowtheoutputname.Thisdropdownlistshows8inputsignalsorscenes,whichcan
beselectedasstandardsettingsintheoutputconfigurationmenuunder‘QuickMenu
Settings’(incaseall8areenabled).Whennoinputsignalisselected,theoption‘Off’
willappear.Whenanotherinputisselectedwhichisnotindicatedasoneofthestandard
inputs,theoption‘Other’willappear.
Time & Date
Theactualtimeanddatearedisplayedatthetopofthemainscreen.
Global scenes
Multiplescenes(oneforeveryoutput)canbegroupedin‘Globalscenes’.TheM2provides
thepossibiltyforcreating8globalscenes,whichmakeitpossibletorecallmixingpresets
foralloutputzonesbyonesingleclick.Theglobalscenescanberecalledusingthe
dropdownlistintoprightcornerofthemainscreenandspecificnamescanbeassigned
tokeepaclearoverview.Moreinformationaboutscenes&globalscenesandhowto
createthemisdescribedlaterinthismanual.
Save (Only Administrator)
Whenanyimportantchanges(suchasoutputnames)aremadetotheM2settings,simply
pressthe‘Save’buttontosavethesenewsettings.Whensettingsaresaved,theywillbe
recalledafterrestart.Whenthesesettingsarenotsaved,theywillbelostafterrestart.
(shutdown&powerupagain)
Configuration menu (Only Administrator)
Inthetoprightcornerisa‘Setup’buttondisplayed.Afterclickingthisbutton,youwillbe
redirectedtothegeneralsettingsmenu.
NOTE
Allsettingsandscreenshereafterdescribedinthisinstructionmanualareonlyaccessible
whenlogged-inasAdministrator.