User manual

23
Output settings
Afterclickingthe‘Settings’buttondisplayedbelowacertainzonename,thesettings
menuforthecorrespondingoutputwillbeshown.Thiswindowgivesanoverviewofall
thesettingswhichcanbeappliedtoonespecificoutput.
M2 Output Settings
Input mixing
AlltheinputsavailableontheM2aredisplayedinthiswindow.Everyinputisprovided
withafader,wherebythemixingforalltheseinputscanbeadjusted.Themixingforeach
inputcanbeadjustedbymovingthecorrespondingfadersupanddownorcanberaised
andloweredinstepsof1dBbyclickingthearrowbuttonsontopandbottomofevery
fader.
Direct inputs
Thefirsteightfadersshownundertheheader‘M2Inputs’arethedirectinputsavailable
onthebacksideoftheM2,whichareperformedusingTerminalBlockconnectors.An
EQbuttonisprovidedatthebottomofthesefaders.Byclickingthisbutton,theequalizer
settingswindowforthecorrespondinginputwillbeshown.Furtherdetailsaboutthe
equalizerfunctionaredescribedinalaterchapterofthismanual.

Wall panel inputs
BelowtheDirectinputs,eightfadersareshownundertheheader‘WallInputs’.These
faderscanbeusedformixingtheaudiosignalscomingfromthe(optional)wallinput
units,whichmaybeconnectedbyRJ45connectorstothePeripheralInputsconnectorsat
thebacksideoftheM2.
Fiber inputs
Besidesthe‘DirectInputs’andthe‘WallInputs’,eightfadersaredisplayedunderthe
header‘FiberInputs’.Thesefaderscanbeusedformixingtheaudiosignalsconnected
totheM2throughthe(optional)FiberInterconnectionModule(OPT2).Thiscanbeused
whenmultipleMatrixesand/orMixersarelinkedwitheachother,andinputsignalscoming
fromdifferentunitshavetobemixed.