User manual

25
Ascenecanbecreatedbyplacingthefadersforallinputsintothepositionwhichis
desirableforthatscene(preset).Thenthispresetcanbestoredtooneoutofthe8
storagepositionsforthatzonebyclickingthe‘Saveasscene’buttoninleftbottomcorner
ofthewindow.Then,awindowwillshow-up,wherebythecreatedscenecanbestored
asoneofthe8providedpresets.Previouslystoredsceneswillbeoverwrittenwhenanew
sceneisstoredtothesameposition.
Whenthetabforthecorrespondingsceneisselected,changesforthecorresponding
scenecanbemade.Usingthe‘Trigger’dropdownlistatthebottomofthisscreen,
thetriggeractiontoenablethescenecanbeselected.Whentheoption‘Notrigger’is
selected,thesepresetswillonlybeloadedwhenthissceneismanuallycontrolled.(Using
thewebinterface,wallpanels,RS232and/orTCP/IPcommands).
AlltheinputspresentontheM2areselectableinthislist,suchasthecontactinputs(both
priority&regularcontactinputs),DirectInputs,Wallpanelinputs,Fiberinputs,...
Whentriggeringonacontactinput,thepresetswillbeloadedonceaconnectionismade
betweenbothcorrespondingcontacts.Whentriggeringonanaudioinput,thepresetswill
beloadedonceanaudiosignalispresentonthecorrespondinginput.Whenthescene
(preset)isloaded,theyremainloadedevenifthetriggersignaldisappearsuntillatrigger
foranotherpresetoccurs.
Scene names
Specificnamescanbeassignedtothescenes,tokeepaclearoverview.Thesenames
willalsobedisplayedonwallpanels,orintheinput/sceneselectiondropdownlistson
themainscreen.
Theassignmentofthescenenamescanbedonebyclickingthe‘Scenenames’button
onthebottomofthe‘OutputSettings’screen.Afterclickingthisbutton,awindowwill
show-updislayingallthescenenames.Simplyclickthesceneandremovetheexisting
scenenameusingthebackspacekey.Subsequently,enterthedesiredscenenameand
simplyclickthe‘Change’button.
Now,thescenenamehasbeenchangedandthenewnamewillappearfromthis
moment.
Save scene settings
Itisveryimportanttosavethescenesettingsafteradjustmentshavebeenmade.
OtherwisetheywillgetlostafterrestartoftheM2.Tosavethescenesettings,clickthe
‘Save’buttoninthetoprightcorneroftheM2Mainscreen.
Test signals
Thetestsignalsscreengivesanoverviewofallspecialinputsignalswhichcanbe
patchedtotheoutputs.Aninternaldigitalsignalgeneratorisprovidedwhichcangenerate
Whitenoise,PinknoiseandSinusoidalsignalswithselectablefrequencies.
Simplyclickthebuttondisplayednexttothedesiredsignalforpatchingittothe
correspondingoutput.Whenasinusoidalsignalisselected,thefrequencycanbeadjusted
byclickingtheupanddownarrowsdisplayednexttotheindicatedfrequency.