User manual

35
Thewindowgivesanoverviewof8listboxes,eachcorrespondingwithanumberfrom1
to8.Whenclickingthislistbox,allinputsignals(Directinputs,Internalsignals,Wallpanel
inputs,Fiberinputs,...)andscenesareselectable.Toeachnumber,oneinputorscene
canbeselected.Aftertheselectionhasbeendone,clickthe‘SetInputs’buttonandthe
inputsorsceneswillbesavedandassignedwiththisoutput.
Output Linking
The‘OutputLinking’windowoffersthepossibilitytolinkseveraloutputs,makingtheInput
signalsand/ortheVolumeforseveraloutputscoupledwitheachother.Thepossibility
existstomakeapermanentlinkingoralinkingundercertainconditions.
M2 Output Linking
Theoutputwheretotheselectedoutputshouldbelinkedcanbeselectedusingthefirst
dropdownlist.Thislistincludesalltheotheroutputswhicharepresentonthedevice.
Usingthe‘Trigger’dropdownlist,theconditionunderwhichtheseoutputsshouldbe
linkedcanbeselected.Whenselecting‘FixedLinked’,theoutputswillbepermanently
linked.Otherselectabletriggerconditionsarethecontactinputs(Priocontact1&2and
Contacts1to8).Whenselectingacontactinputaslinkingcondition,theoutputzones
willbelinkedwhenaconnectionhasbeenmadebetweentheselectedtriggercontact.
Thelinkingbetweentheoutputswillremainaslongasthecontactisestablished.The
connectiononthecontactinputscanbedonebyaswitch,relayorotherswichingdevice.
Whethertheinput,thevolumeorbothinputandvolumeshouldbelinked,canbeselected
usingtheselectionbuttonsatthecentreofthescreen.Whentheinputsarelinked,the
signalofthe‘Slave’outputwillfollowwhenthesignalofthe‘Master’outputhasbeen
changed.Whenthevolumeislinked,thevolumeofthe‘Slave’outputwillfollowwhenthe
volumeofthe‘Master’outputhasbeenadjusted.
Usingthe‘Volumeoffset’fader,afixeddifferencebetweenthevolumeofthe‘Slave’
outputrelativetothevolumeofthe‘Master’outputcanbeset.Thisway,thevolumeof
the‘Slave’zonewillfollowthevolumeofthe‘Master’zonewhenchanged,withafixed
differencebetweenbothvolumes.(Incasenomaximumvolumelevelisset).