User manual

61
M2 Paging console address assignment
2)SelectthePriority,thenumberoflayersandEnable/Disablechime.
Whenapagingconfigurationshouldbemadetoanewinstallation,clickthe‘New
configuration’button.IncaseachangetoanexistingAPMinstallationshouldbemade,
clickthe‘Change’button.Whenclickingthe‘Newconfiguration’button,alldefault
settingswillbeloaded,whilewhenclickingthe‘Change’button,allexisitingsettingsfrom
theAPMwillbeloaded,andchangescanbemadetotheexistingsettings.
The‘Generalconfiguration’windowshowsdifferentdropdownlistsonwhichsettings
canbemade.The‘ConnectionInformation’dropdownlistsindicatestheaddressof
thedevicewherethepagingconsoleisconnectedto.Incaseonlyonedeviceisused
intheapplication,address‘M001’shouldalwaysbeselectedinthisfield.Incase
multipledevicesarelinkedusingthefiberinterconnectionmodules,theaddressforthe
correspondingdeviceshouldbeshownhere.
Inthe‘Port’dropdownlist,thenumberofthecorrespondingPIportonwhichthepaging
consolehasbeendetectedwillbeshownhere.
Inthe‘Priority’dropdownlist,theprioritylevelfortheconnectedpagingconsolecanbe
set.Asdescribedbefore,thelowertheaddressorprioritynumber,thehigherthepriority.
Prioritynumber‘1’willalwayshavehighestprioritywhileincreasingnumberswillhave
decreasingpriority.
IncaseanAPM108orAPM116isconnected,theconfigurationofthebuttonscanbedone
indifferentlayers.Thenumberoflayerscanbeselectedbyusingthe‘Layers’dropdown
list.
Usingthe‘PTTChime’checkbox,theChimewhichprecedestheannouncedmessagecan
beEnabledorDisabled.Incasethe‘PTTChime’checkboxischecked,alwaysaChime
willsoundinprecedingtheannouncedmessage.Incasethischeckboxisnotchecked,
thespeakers’sannouncementwillimmediatelybehearduponpressingthePush-To-Talk
button.