User manual

64
Play message:
Usingtheplaymessagefunction,messagesstoredintheAPMmemory,suchas
emergencyorcommercialannouncementscanbeannounced.Thestoredmessagesare
showninthe‘Message’dropdownlistwhereoutthedesiredmessagecanbeselected.
Thepriorityofthemessageisbasedontheprioritynumberwhichcanbesetinthe
‘Priority’dropdownlist,andisnotrelatedwiththeAPMaddress.Thisway,high-priority
emergencymessagescanbeplayedwithalow-priorityAPM.
Thelowertheprioritynumberis,thehigherthepriorityoftherelatedmessage.
M2 Paging Play Message selection
Pulse / Toggle Relay:
Usingthe‘PulseRelay’and‘ToggleRelay’functions,theinternalrelaysoftheM2and/or
externalconnectedrelayunits(ARU)canbecontrolled.Thetogglerelayfunctionwillmake
thecurrentrelaysstateswapped.Whenthecurrentrelaystateisopen,itwillchangeto
closedaftertoggle.Whenthecurrentrelaystateisclosed,itwillchangetoopenafter
toggle.
Thecontrollablerelaysshouldbeaddedtothe‘SelectedRelays’listbox.Mutliplerelays
canbesimultaneouslycontrolledbyaddingthemtothislistbox.
Therightsideofthewindowcontainstwolistboxeswherebythecontrolledrelayscanbe
selected.Theaddressofthedevicecontainingtherelayshouldbeselectedinthefirst
listbox,whilethesecondlistboxindicatesthenumberoftherelaytobecontrolled.
IncasetheinternalM2outputrelaysshouldbecontrolled,thecorrespondingM2address
(staringwith‘M’)shouldbeselected.Incasetherelaysfromanexternalconnectedrelay
unit(ARU)shouldbeconnected,theaddressoftheARUunit(startingwith‘S’should
beselected.Thesecondlistboxshouldbeusedforassigningwhichspecificrelayofthe
deviceshouldbecontrolled.
Aftertheaddressassignmentfortherelayhasbeendone,clickthe‘Add’buttonandthe
selectedrelaywillappearinthelistbox.
Repeatthisactionforeveryrelaywhichshouldbesimultaneouslycontrolled.