Operation Manual

Bio-AX® Camera Operation Manual 2020
Page:
Pg 10 of 23
Document ID:
Bio-AX® Camera Manual
Version:
1.0
Date of Approval:
24/09/2020
Next Review Date:
24/09/2021
3) If recording is required in “low light” conditions, press the IR button (unless
IR “Auto” has been previously selected). The IR illuminators will be turned
on and the device will enter the night shooting mode.
4) IMPORTANT NOTE: Video recorded when IR has been selected will be
in black and white only.
c. Still Images.
1) Once turned on, the device will automatically enter the camera preview
mode. Press the PHOTO button to take still images.
2) As already mentioned, if photos are to be taken in “low light” conditions, turn
on the IR illuminators (unless IR “Auto” has been previously selected).
3) IMPORTANT NOTE: Still images taken when IR has been selected will
be in black and white only.
4) When recording Video, the PHOTO button can be pressed to capture a
picture while still recording at that time.
d. Audio recording.
1) Once turned on, the camera will automatically enter the camera preview
mode.
2) Press the AUDIO button to record audio ONLY. The device will vibrate and
the “work” LED on the top will change to RED.
3) Press the AUDIO button again to end audio recording, and the audio file will
be automatically saved.
e. SOS Button.
1) When the camera is in video recording mode (and not streaming), press
to mark/unmark file as important.
2) When the camera is streaming video to the CMSV6 application (Monitoring
Software), press and hold to trigger SOS. On CMSV6, it will show as
an “Emergency” message within the command prompt.