Operation Manual

Bio-AX® Camera Operation Manual 2020
Page:
Pg 9 of 23
Document ID:
Bio-AX® Camera Manual
Version:
1.0
Date of Approval:
24/09/2020
Next Review Date:
24/09/2021
d. Right
1) USB / SIM Card slot.
2) SOS button.
e. Rear
1) 360° detachable clip.
2) Display Screen.
3) (1) “Menu” / “OK” button.
4) (2) “Up” button.
5) (3) “Down” button.
6) (4) “Back” / “Replay” button.
6. General System Operation.
a. Power On/ Off.
1) Press and hold the POWER ON / OFF button for 3 seconds; the camera will
turn on and enter the standby mode (the device will vibrate).
2) When the device is ON, pressing the POWER button for 3 seconds will turn
the device OFF.
b. Video Recording.
1) Once turned on, the device will automatically enter the camera preview
mode and a live picture will be shown on the display screen. Press the
RECORD button to commence recording; the device may vibrate and the
“work” LED on the top will change to RED and a beep will be heard. A RED
circle will also show on the display screen.
2) Press the RECORD button again to stop recording; the device may vibrate,
the “work” RED LED will return to Green and a beep will be heard. At this
point, recording will stop (unless Post-event recording has been selected)
and the video will be saved.
1 2 3 4