USER MANUAL
OVERVIEW PARAMETER �gth/button Size We ight Button Chipse ts Sensor -c:=---+-+1-F-����=;i�� button g �� \Q) USB /Headphone port LCD Up/Left button._......,._.
BUTTON PARAMETER . . Wi-Fi .. .. 2.4G, AP/STA/P2P,Wi-Fi channel can be set by cam manager / / I R: 10 meters (2 IR LED) GPS/NFC:Optional / / Optional (camera talk to camera.
FUNCTIONALITIES FUNCTIONALITIES Notice: If camera is in recording mode, the video will be stored properly then camera turn off. Turn on/off LCD: When camera is on, press backlight of LCD screen. ml to turn on / off the 2. Video Recording When camera is in standby mode: If camera is in standby mode (power on but not recording), press to start recording, press again to stop recording. GD 1. Power On/Off ml to turn on the camera.
FUNCTIONALITIES FUNCTIONALITIES (2) Quality There are three options to select from: S. Fine / Fine / Normal (S)Streaming Frame Rate (3) Photo Size There are six options to select from: 4M/SM/12M / 16M / 30M / 40M (4) Selfie There are four options to select from: Off/3 sec/5 sec/10 sec Press�, camera will take a photo after the selected time period.
FUNCTIONALITIES FUNCTIONALITIES When loop recording is set "On", it provides a way to let camera keep recording when memory space is full, because the oldest file will be overwritten by the latest file. There are six options to select from: On/ 5 sec/ 10 sec/ 15 sec/ 30 (18) Record Notification sec/ 60 sec Off/ 5 sec/ 10 sec/ 20 sec/ 30 sec/ 60 sec/120 sec Recording Notification will give audio beeping at the specified interval as long as the camera is recording.
FUNCTIONALITIES FUNCTIONALITIES D One key audio recording: When camera is off, hold for 3 seconds, camera will turn on and start audio recording right away. Press again to stop audio recording. 7. File Tagging D a, While video is being recorded, press there will be a� icon show on the LCD screen, the video will be tagged as important file. Press to stop recording, video will be saved as important video. GD 9.
FUNCTIONALITIES FUNCTIONALITIES Default password: For general user default password is 000000, user can only check settings, but can not change settings. For administrator default password is 888888, user are able to change settings. To change password, please use Cam Manager. Recording Auto: Only during video recording, infrared LED will be turned on/ off automatically according to the environment light condition.
FUNCTIONALITIES FUNCTIONALITIES (11) Clock Beep There are two options to select from: On I Off On: Once time is full clock, camera will beep. Off: Once time is full clock, camera will not beep. On: A password is required, when user want to go to Menu mode. Default password: For general user default password is 000000, user can only check settings, but can not change settings. For administrator default password is 888888, user are able to change settings. To change password, please use Cam Manager.
FUNCTIONALITIES FUNCTIONALITIES 13. About Device 14. Other Button Functions In preview mode, pressmto enter into setup menu, select the "About" icon and press m again to go to setting list. It includes information as below: Location System Info, Total Space, Available Space, Remaining Video, Remaining Audio, Remaining Photos, Battery Status, Temperature, Server IP, Server Port, Account, module, IMEI, APN, IP, Signal, WLAN MAC, WLAN SSID, WLAN IP, Serial Number, Hardware Version and Firmware Version .
FUNCTIONALITIES FUNCTIONALITIES 16. Charging 17. Headset Please charge camera via USB cable and wall charger provided. The battery used in camera is Polymer Lithium type. When camera is fully charged, blue charging indicator will turn off. There are 2 ways of charging: 1. Connect camera to computer via USB cable Since the current of different computer's USB port varies from each other, it is normal if there are circumstances that camera can not be fully charged. 2.
CAM MANAGER CAM MANAGER Installing the Camera Management Software allows for viewing and downloading saved photos and videos, changing device settings, and syncing date and time. After login, the Camera Management Software will open on the Camera Info tab. 3. Camera Info 1. Software Requirements Windows 7,8, or 10 operation system Hard drive storage for archiving video (1TB recommended) camera Info Networ1t Setmos Cimera SettiuJs Other Settr,gs Encrypt»n Pa5Sword """'�'° ModoNo, 2.
CAM MANAGER CAM MANAGER (2) Click "Refresh" button to refresh the battery status; (3) Click "Sync PC Date Time" to sync the camera's date & time to the computer's. (4) Click "Open File Explorer" to get access to camera SD card mass storage. User are able to check, copy or delete files. (5) Click " Format Disk" to Format the Camera's Memory Disk, the files will be DELETED immediately, and the disk's space will be released. 4.
CAM MANAGER CAM MANAGER E. In Direct mode, user can check the WIFI Password. To change password, just input new password in the "Pin Code" textbox, click "Apply" to save the settings. camera Info Networ1c Settrlgs Cuner.11 Settrigs other Settrlgs MM'IResolilion: l92C•1080(P30) Streamric;iResolition: 432'"210 i"\Jtt:Rttolding: Off VideoSpl,tter:5rr«'I Sttea,rw,gControi: A.V PreRccord: Off ReairdngPr�: Off wo!,bs«wr: HttDS PMtRttord: Off 5.
CAM MANAGER CAM MANAGER Streaming Bitrate Click the"Streaming Bitrate" drop down. There are seven settings to choose from: 5000Kbs / 4000Kbs / 3000Kbs / 2000Kbs /1000Kbs / 500Kbs / 300Kbs Recording Notification Click the"Recording Notification" drop down. There are six settings to choose from: Off/ 5sec/10sec/15sec/ 30sec/ 60sec Click the setting you prefer and click"Apply" to save. Streaming Frame Rate Click the"Streaming Frame Rate" drop down.
CAM MANAGER CAM MANAGER Photo Size Click the "Photo Size" drop down. There are six settings to choose from: 40M/30M/ 16M/ 12M/SM/4M Display Brightness Click the "Display Brightness" drop down. Click the setting you prefer and click "Apply" to save. Timelapse Click the "Timelapse" drop down. There are six settings to choose from: Off/0.5 sec/ 1 sec/3 sec/5 sec/ 10 sec Click the setting you prefer and click "Apply" to save. Photo Quality Click the "Photo Quality" drop down.
CAM MANAGER CAM MANAGER Date Format Click the "Date Format" drop down. There are three settings to choose from: YYYY-MM-DD/ DD-MM-YYYY / MM-DD-YYYY Charge State: Click the "Encoding Format" drop down. There are two settings to choose from: Off: Camera can not be charged while camera is on. Normal State: Regular charging mode while camera is on.Fast State: Fast Charging mode while camera is on. Click the setting you prefer and click "Apply" to save. Auto IR Click the "Auto IR" drop down.
CAM MANAGER CAM MANAGER Power-on Auto Record Click the "Power-on Auto Record" box to get camera to starting recording automatically after powered on. Motion Detection Click the "Motion Detection" box to turn on motion detection, uncheck to turn off. Clock Prompt Click the "Key Tone" box to turn on/off clock beep prompt. Led Indicator Click the "Led Indicator'' box to turn LED indicator lights on or off.
CAM MANAGER CAM MANAGER 7. Change Password 6. AES Encryption Click the "AES256 Encryption" tab in camera management software. Cilllli!l'ii Info tl!!twork S@tttll.f.i Cilmeril Setttiq� other Settilgs Enaypb::m Click the "Change Password" tab in the Camera Management Software.
CMSV6 SOFTEARE CMSV6 SOFTEARE Note: The CMSV6 software is only for WIFI version camera. How to connect body camera to CMSV6 4. Find "Server Port" under "Server Config", default setting is 6608, no need to change. 1. Connect to CMSV6 5. Find "APN" , input the APN of the SIM card, click "Apply" to save the setting. The instruction for WIFI network connection as below: 1. Open cam manager, Click "Network Settings" tap, then Click "WIFI Start" drop down, which is under "WIFI".
CMSV6 SOFTEARE CMSV6 SOFTEARE 4. How to use the CMSV6 Monitor: CMSV6 platform can check the video and audio from camera only. Broadcast: CMSV6 platform can send audio broadcast to one or multiple cameras. 3. Start & Stop Intercom/Monitor There are 3 ways to start & stop intercom/Monitor (1) Choose the camera from camera list (Under Organization), right click the mouse, choose "Start Intercom" or "Start Monitor". Then right click the mouse, choose "Stop Intercom" or "Stop Monitor". ,�0 -�- �-�+� /'gan.
CMSV6 SOFTEARE CMSV6 SOFTEARE (3) Choose the camera on the maps, and click the "Intercom" or "Monitor'' to start intercom or monitor. 5. Voice Dispatch Choose "Voice dispatch" to make group voice talk. Drganization1oice dispa§ dmt00l Police number:dmto01 Date:2020-06-01 09:53:07 Device Number:dmto0I Position :22.607690,113.860123 status:Online, 4G, GPS Invalid, Network signal normal Video Intercom Monitor Snapshot More I I i dm100I 4.
CMSV6 SOFTEARE CMSV6 SOFTEARE 6. GPS Maps: The camera location will be shown on the maps. 10. Live Video Streaming 7. Reports: Reports will record the events, such as Personnel Monitoring, Alarm Information, System Event, Schedule Event, Device Reporting Information, Media List, My Map. (1) Open the streaming video, by double click the camera from the camera list to open the preview of camera live streaming. 8. The Streaming Video: Click to see the video streaming.
CMSV6 SOFTEARE (8) [ iJII..,,.: Volume: To enable/disable voice and tuning voice CMSV6 SOFTEARE Icon & Functions volume. (9) [E8 Icon - Start Video: Start the video preview of the selected video window; - Open All Videos (The current page): Start all the videos on the current page; - Open All Videos (All pages): Start all the videos of all pages; - Display Polling Window: Set certain time to display video. (10) � Stop Video: To stop video and clear data.
CMSV6 SOFTEARE (2) After searching, select "File" to check the recorded files. :?OJXll.-1113;19;!4 /'f, 0 2011)(11.-L�ll:- (3) Select the file you want to download, double click mouse or right click mouse, select file download to download the file. The download status could be checked in "Download" part. Q&A Question Answer Analysis Out of battery Charge for 4 hours. Mainboard Protection Use Reset button.
NOTICE FOR USER (4) The product malfunction caused by Not in accordance with the user manual operation. (5) The malfunction and damaged caused by the other barriers (man made factors or external device). FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
