User's Manual

3. 5V DC power adaptor
Attention: Always switch off the speaker system
when not in use to save battery power.
The unit will function for approximately 20 hrs.
on 4 AA alkaline batteries.
User's Guide
5
Note: The STB-2812 must connect with an audio
source that supports streaming stereo sound. Some
newer devices have this function built-in (P Cs, mobile
phones). However, for older devices you must use an
accessory adapter, usually connected to the USB port.
This is not included with the STB-2812.
Pairing with the stereo adapter
Place the STB-2812 and the adapter within 30cm of each
other and follow these steps:
1. Press the main power button, which will turn
on the unit and extend the speakers from the base.
2. Press and hold the pairing button for about 5
seconds. The blue LED will blink quickly. This
means the speaker is in pairing mode
3. When the blue LED flashes slowly, this means the
pairing is successful.
4. The audio can now be transfered from the audio source
to the compact speaker system.
Pairing with a
Bluetooth Stereo Adapter
Bluetooth Stereo
Adapter
®
<30cm>
5 seconds
6