User Manual

Source: Connect the input end of the cable to your source device.

Output: Look for the (L)eft and (R)ight indicators on the two 2-pin cable

ends and match them to the headphones accordingly. Ensure that both

sets of cable indicators align with the indicators on the headphones and

insert the plugs. You will feel a gentle click indicating the plugs are locked

in place.

NOTE: The connectors are keyed and can only ﬁt in one direction. DO NOT

force the connector in backwards, doing so will damage your headphones.

Match the inside L and R indicators

Ensure the plug is fully inserted

Connect the 3.5mm audio plug to your ampliﬁer

or source component

Connecting your Headphones