Service Manual

240 LOWER V.B. TO ACCUMULATOR HOUSING 2 BOLT (70 MM LENGTH).
241 LOWER V.B. TO UPPER V.B. BOLT (39.5 MM LENGTH).
242 LOWER V.B. TO UPPER V.B. BOLT (28 MM LENGTH).
243 ACCUMULATOR 2 HOUSING TO UPPER V.B. (64 MM LENGTH)(3 REQ).
244 ACCUMULATOR-2 HOUSING TO UPPER V.B. (52 MM LENGTH)(4 REQ).
245 ACCUMULATOR-1 HOUSING TO UPPER V.B. (52 MM LENGTH)(4 REQ).
246 ACCUMULATOR-1 HOUSING TO UPPER V.B. (64 MM LENGTH)(2 REQ).
247 ACCUMULATOR-2 HOUSING ASSEMBLY.
248 ACCUMULATOR-2 ASSEMBLY SPACER PLATE.
249 ACCUMULATOR-1 HOUSING ASSEMBLY.
250 ACCUMULATOR-1 ASSEMBLY SPACER PLATE.
251 UPPER V.B. TO LOWER V.B. BOLTS (21 MM LENGTH)(10 REQUIRED).
252 UPPER VALVE BODY ASSEMBLY.
254 LOWER VALVE BODY ASSEMBLY.
300 MAIN VALVE BODY SPACER PLATE.
89
Copyright © 2010 ATSGCopyright © 2010 ATSG
AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
19 7
0
19 70
1T
T1
9170
T1
C7CA3 00708
7CA3C007 40
5BY A01373 1
5BX3A01706
5
CB3B00400
C04AU3 0100
"09G" VALVE BODY EXPLODED VIEW
240
241
242
243
243
247
248
252
300
254
243
244
246
249
250
251
245
Figure 148 Figure 149
VALVE BODY ASSEMBLY
COMPONENT REBUILD (CONT'D)
1. Disassemble the main valve body components
using Figure 148 and 149 as a guide.
Note: All valve body bolt lengths are found in
the legend and must be positioned properly.
2. Clean all valve body components thoroughly and
dry with compressed air.
Note: Do not submerge solenoids in solvent.
3. Inspect all valve body components thoroughly
for any damage.
See Legnd in Figure 148
Continued on Page 91
WWW.ALL-TRANS.BY