Self-Study Program

11
Note
Always make sure that the fitting bushes are
installed correctly between the engine and the
gearbox. Missing fitting bushes will result in
irreparable damage to the roller bearing, the
torque converter hub and the shaft oil seal due
to offset between the engine and the gearbox.
Note
When installing the torque converter and
before installing the gearbox, special care must
be taken to ensure that the ATF pump drivers
engage properly into the driver grooves on the
torque converter hub.
This can be checked by measuring the installed
position of the torque converter (refer to the
Workshop Manual).
367_071
Reference
You will find information about the basic
functions of the torque converter in multimedia
training course "Power Transmission 2".
Fitting size - torque converter
ATF pump
Torque converter hub
Pinion
Ring gear
Driver
Driver
Pinion
Roller bearing
Mounting instructions
ATF pump
(removed)