Operation Manual

DO-IT-YOURSELF SERVICE
142
Reading light bulbs
Pull down hand grip and remove the
f
§
now visible Phillips screws.
§ With screw driver, carefully pry of
(arrow). the plastic coat hook
§ Remove the now visible Phillips
screw.
§ Push in bulb, turn counter-clockwise
and remove.
§ Replace bulb.
t. § Reinstall ligh
Luggage compartment light
§ Insert a screwdriver between
of the light housing and metal pan
edge
el and
light housing.
§ To reinstall the light housing, insert
the side with the connector first, then
press in the opposite side until firmly
seated.
carefully pry out the
§ Replace bulb.
Engine compartment light
*
§ Squeeze both sides of transparent
plastic cover (arrows) and remove.
§ Gently press bulb into holder, turn
counter-clockwise and remove.
§ Install new bulb
§ Press plastic cover into place
*
where applicable