Service & Repair Manual

01-84
Work step 2: Erase DTC Memory
Test requirement
Engine not running, ignition switched on.
Rapid data transfer HELP
Select function XX
When indicated on display:
Note:
When DTC memory is erased, readiness code is reset and must therefore
be re-generated.
- Press buttons -0- and -5- to select "Erase DTC memory" and press -Q-
button to confirm input.
Rapid data transfer
DTC Memor
y
is erased
When indicated on display:
-
Press button.
Pa
g
e 10 of 47Readiness code
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.01.7