Service & Repair Manual

01-11
- Press -Print- button to turn on Scan Tool (ST)
printer. Indicator lamp in button must light up.
- Press button 1 to select "Rapid data transfer"
operating mode 1.
Rapid data transfer HELP
Insert address word XX
When indicated on display:
Note:
The address word 00 initiates the automatic test sequence, i.e. it results in
a DTC check on all OBD capable systems in the vehicle via rapid data
transfer.
- Press buttons -0- and -1- to select "engine electronics" and press -Q-
button to confirm input.
3B0907551BA 2.8l V6/5V G 0003
Codin
g
07251 WSC 12345
VAG1551 Scan Tool (ST) display indicates control module identification,
e.g.:
Note:
Control module identification can be printed by pressing the PRINT key of
the VAG1551 scan tool.
Pa
g
e 15 of 19Motronic, On Board Dia
g
nostic
(
OBD
)
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.01.1