Service & Repair Manual

24-46
Test requirement:
Fuel pressure OK, checking Page 24-30 .
Test sequence
- Remove fuel distributor including fuel injectors
from intake manifold Page 24-43 . Fuel lines
remain connected.
- Connect VAG1598/31 test box at wiring harness
to ECM, do not connect ECM Page 24-17 .
- Bridge terminals 1 and 65 at test box using
adapter cables from VAG1594A connector test
kit (this step supplies Ground -GND- to one side
of relay coil for Fuel Pump -FP- relay).
Note:
Fuel Pump (FP) relay is supplied with B+ via the
central electric (terminal 30). Fuel Pump (FP)
relay receives minus via the cable bridge in test
box. The Fuel Pump (FP) is now running
constantly.
Pa
g
e 55 of 78Motronic in
j
ection s
y
stem, servicin
g
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.24.1