Service & Repair Manual

24-62
- Repair open circuit or short circuit if
necessary.
Note:
Ground (GND) from the ECM is present at terminal 2 of connector.
If specified value is not obtained:
- Connect multimeter to terminal 2 and terminal 3 of connector for
voltage measurement.
- Operate starter briefly.
Specification: approx. battery voltage
- Check wire connections Page 24-63 .
If specified value is not obtained:
- Connect multimeter to terminal 1 and terminal 2 of connector for
voltage measurement.
- Switch ignition on.
Specification: about 5 V
- Check wire connections Page 24-63 .
Pa
g
e 74 of 78Motronic in
j
ection s
y
stem, servicin
g
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.24.1