Service & Repair Manual

01-16
- Find printed DTCs in DTC table and repair
Page 01-18 .
Important note:
If there are no DTCs in DTC memory, DTC
memory should not be unnecessarily erased or
else readiness code will be lost.
If DTC memory was erased, readiness code
must be re-generated Page 01-82 .
-
Press button.
Rapid data transfer HELP
Select function XX
When indicated on display:
Note:
- Press buttons -0- and -5- to select "Erase DTC memory" and press -Q-
button to confirm input.
Attention!
DTC Memor
y
was not interro
g
ated
When indicated on display:
Procedure was not followed exactly.
- Check DTC memory.
DTC memory will not be erased under the following conditions:
Ignition switched off after DTC memory was checked.
Pa
g
e 3 of 52Check DTC Memor
y
(
function 02
)
and Erase DTC Memor
y
(
function 05
)
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.01.2