Service & Repair Manual

01-17
Rapid data transfer
DTC Memor
y
is erased
When indicated on display:
Note:
This causes DTCs to be erased that were stored during repair of
malfunction, e.g. because harness connectors were disconnected.
End Output
-
Press button.
- Check DTC memory again after repair work and erase it if necessary.
- If DTC memory was erased, readiness code must be re-generated
Page 01-82 .
Rapid data transfer HELP
Select function XX
When indicated on display:
- Press buttons -0- and -6- to select "End output" and press -Q- button to
confirm input.
Rapid data transfer HELP
Insert address word XX
When indicated on display:
- Switch off ignition and disconnect diagnostic cable.
Pa
g
e 5 of 52Check DTC Memor
y
(
function 02
)
and Erase DTC Memor
y
(
function 05
)
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.01.2