Service & Repair Manual

24-146
Display fields
1 2 3 4
Display group 060: Adaptation of throttle valve control module
Display
xx % xx %
x ---
Indicated
Throttle
valve angle
(angle
sensor 1)
Throttle
valve angle
(angle
sensor 2)
Adaptation step counter Adaptation condition
Functional
range
0 to 100% 0 to 100 %
0 to 8 ADP in progress
ADP OK
ADP ERROR
Specified
value
3 to 93 % 97 to 3 %
8 ADP OK
Notes After adaptation, the adaptation step
counter reaches the number 8 (it is OK for
numbers to be skipped).
If "ADP ERROR." is displayed:
Check DTC memory Page
01-15 .
If specified value is not
obtained: Note, page
Page 24-147 .
Note for display field 3:
Different numbers are shown in display field 3 during adaptation that represent the current adaptation condition. It is not
particularly important how the adaptation step counter (display field 3) behaves during adaptation, but rather that display field
Pa
g
e 17 of 41Electronic en
g
ine
p
ower control
(
E-Gas
)
, checkin
g
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.24.5