Service & Repair Manual

24-193
Rapid data transfer HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read Measuring Value Block Q
Input displa
y
g
roup number XXX
When indicated on display:
Note:
Measuring value blocks 125 and 126 indicate the components that are
part of the powertrain data bus.
- Press buttons -1-, -2- and -5- to select "display group number 125" and
press -Q- button to confirm input.
- Check indications in display fields 1 through 4.
CAN capable control modules connected to the Engine Control Module
(ECM) are indicated:
No indication: Control module not CAN capable
Indication 1: CAN capable control module is connected to databus
Indication 0: CAN capable control module is not connected to
databus
-
Press button.
Pa
g
e 38 of 44Additional si
g
nals, testin
g
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.24.6