Service & Repair Manual

24-196
Example 1:
From the DTCs stored in the memories, you have determined that control
module 1 is not communicating with control modules 2 and 3.
Electrical Wiring Diagrams, Troubleshooting & Component Locations
binder
Control module DTCs stored in DTC memories:
1
Missing signal from control module 2
Missing signal from control module 3
2
Missing signal from control module 1
3
Missing signal from control module 1
- Switch ignition off.
- Disconnect the control modules connected across the bus wires and
check the bus wires for an open circuit.
- Replace control module 1 if no malfunctions can be found in the bus
wires.
Pa
g
e 41 of 44Additional si
g
nals, testin
g
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.24.6