Service & Repair Manual
28-12
Checking activation
- Disconnect connectors from all six fuel injectors.
(afterward check DTC memory)
If specified values are not obtained:
- Connect VAG1527B voltage tester as follows:
Harness connector
Terminal
Measure to
3 Engine Ground (GND)
4 Engine Ground (GND)
5 Engine Ground (GND)
- Operate starter for a few seconds.
LED must blink (brief blink signal).
- Switch ignition off.
- Connect VAG1598/31 test box at wiring harness to ECM, do not
connect ECM Page 24-17 .
Pa
g
e 15 of 65I
g
nition s
y
stem, checkin
g
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.28.1