Service & Repair Manual

01-61
Activating camshaft adjustment valves
-
Press button.
Output Diagnostic Test Mode
Camshaft ad
j
ustment 1
Indicated on display:
If valves are not activated (do not click).
Repair Manual, Engine Mechanical, Repair Group 15; Camshaft
adjustment, checking; Function of camshaft adjustment, checking
Activating Leak Detection Pump (diagnostic pump for tank
ventilation system)
Valve -1- for camshaft adjustment -N205- and valve -2- for camshaft
adjustment -N208- are activated for approximately 1 minute (they click)
unless output Diagnostic Test Mode (DTM) is ended first by pressing
the " button
- Check camshaft adjustment valves:
-
Press button.
Output Diagnostic Test Mode
Leak detection pump Tank vent valve system
Indicated on display:
Th change-over valve in the LDP is activated for approximately 1
minute (clicks), unless button is pressed first to switch to the next
actuator.
Pa
g
e 7 of 12Out
p
ut Dia
g
nostic Test Mode
(
DTM
)
(
function 03
)
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.01.3