Service & Repair Manual

01-78
Readiness code, checking
Test sequence
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01-
9 .
Ignition must remain switched on for this.
Rapid data transfer HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read Measuring Value Block Q
Input displa
y
g
roup number XXX
When indicated on display:
- Press buttons -0-, -8- and -6- to select "display group number 086" and
press -Q- button to confirm input.
Read Measuring Value Block 86
1 2 3 4
When indicated on display:
- Check readiness code in display field 1
Specification: 0 0 0 0 0 0 0 0
Pa
g
e 3 of 47Readiness code
11/23/2002htt
p
://127.0.0.1:8080/audi/servlet/Dis
p
la
y
?action=Goto&t
yp
e=re
p
air&id=AUDI.B5.FU05.01.7