Quick Start Guide

At your desired speed, press the button
at the end of the stalk. The set speed and the
illuminated icon are shown in the
Driver Information Display.
To activate, pull the control stalk toward you.
Set Cruising Speed
Cruise Control
Activate
31
SET
CRUISE
TEXT A4CRUISE to 38981
Do not text and drive. Message and data rates may apply.
Important Safety Instructions and Warnings which you must read, are listed on the last panel under cruise control.
Changing Speed
To cancel and resume cruise control:
1. Press the brake pedal or push the stalk
slightly away from you.
2. The light will go o.
3. To resume, pull the stalk towards you;
you will return to your set speed.
Your most recently set speed appears as a
small icon in the Driver Information Display.
It remains in memory until you turn your
Audi o.
Cancel/Resume
There are three ways to change your speed:
1. Accelerate or decelerate, then press
again.
2. To increase/decrease speed in 1 mph
increments, tap the stalk up or down.
3. Hold the stalk up or down to
increase/decrease speed in 5 mph
increments; release when desired
speed is reached.
32
SET
CRUISE
Cruise Control