Specifications

Address: 1000 Seville Road, Wadsworth, OH 44281
Phone: [phone]
Web: www.ecstuning.com
Page -
11
B5 S4 Timing Belt Kit Installation
Step 5.
Rotate the accessory belt tensioner hex with a 17mm
socket and long handled ratchet to relax the belt
tension. Peel the old accessory belt o the pulleys and
discard it.
Finish removing the power steering pump bolts
loosened in the previous step. Remove the power
steering pump pulley.
Step 6.
Remove the three water pump bolts, marked 1, 2, and
3 in our photo. Bolt 1 is located on the back end of the
pump body. Use a ex head extension with hex driver or
a ball head hex driver to loosen and remove it.
Remove the dipstick tube attachment nut (4) and pull
the dipstick tube from the engine. e lower end of
the tube is sealed in its hole with an o-ring; after 100k
miles, you may need to forcibly evict it with prying and
wiggling.
Step 4.
Loosen the power steering pump bolts. (If you are
doing it by hand without air tools, having the accessory
belt in place helps hold it stationary as the bolts are
cracked loose.)