Specifications

Address: 1000 Seville Road, Wadsworth, OH 44281
Phone: [phone]
Web: www.ecstuning.com
Page -
15
B5 S4 Timing Belt Kit Installation
Step 17.
Remove the old crankshaft seal using a seal puller.
Be careful not to damage the crankshaft or front engine
case sealing surfaces.
Step 18.
Use a seal installer, large socket, or length of tubing to
tap in the new seal. Drive it in ush and level with the
face of the raised boss on the cover.
Step 16.
Pull the crankshaft sprocket o the crank snout by
hand, and ip it over. Make sure the locator tab that
indexes the sprocket to the crankshaft is not damaged
(arrow). Improper installation of the sprocket has
smashed the tab on some vehicles, so it pays to check it.