Specifications

It is important that you connect your preamplifier (outputs) and phono turntable (inputs) to your Plinius

Jarrah Phono Preamplifier correctly to ensure the preamplifier is not damaged, and sounds its best within

your system.

Connect your phono turntable to the inputs on the back of the Plinius Jarrah. Make sure you connect the

red coded cable to the red RIGHT RCA input, and the black (or white) cable to the black LEFT RCA input.

Also, make sure all the RCA connectors are a snug fit and are inserted all the way in.

Now connect your preamplifier interconnects to the outputs on the Plinius Jarrah, again ensuring you have

left and right channels connected in phase. Note that the output of the Jarrah Phono Preamplifier is at

‘line level’ or the same as that of normal CD players, tuners etc. DO NOT connect the output from your

Jarrah to a dedicated preamplifier phono stage as the gain of the Plinius Jarrah and Preamplifier will be

mismatched, which could damage the preamplifier phono stage. Use only normal line level preamplifier

inputs when connecting the Plinius Jarrah.

If your phono turntable has an earth cable, this can be connected to the gold earth post on the back of the

Plinius Jarrah.

Fit the power supply DIN socket to the back of the Plinius Jarrah. It only fits in one way, and ensure that it

is fitted securely.

TERMINATION QUALITY

Quality of the connections must be examined to ensure that high-performance, trouble-free operation is

enjoyed. Check that all interconnection cables are snug fitting and inserted all the way in.

PHASING (OR POLARITY)

It is important to achieve good stereo imaging in your listening room. By observing the wiring

instructions above, each preamplifier/power amplifier/loudspeaker combination should be in phase. If

you experience poor stereo image and/or a lack of bass, check that all interconnection cables and

loudspeaker wires have been connected correctly. We recommend that you use one of the easily

obtainable ‘test discs’ to help you ensure both phasing and channel orientation are correct. If in doubt,

consult your PLINIUS

PLINIUSPLINIUS

PLINIUS dealer for advice.