Specifications

8
To achieve a sound performance that is correctly aligned to your room, make sure all of the leads carrying
signals for the RIGHT channel loudspeaker are connected to the RIGHT input/outputs on your power
amplifier/preamplifier/CD player etc. Signals for the LEFT channel should be wired in a similar fashion.
CONNECTING THE MAINS SUPPLY
Now that your Plinius Jarrah Phono Preamplifier is configured to your system correctly, the mains cable
can be plugged into the IEC socket on the back of the power supply pack. Re-check all interconnection
cables are fitted correctly. Flick the wall switch on. The front LED should light and the Plinius Jarrah is
ready to use.
WARM-UP PERIOD
You will find that the Plinius Jarrah will become noticeably ‘warmer’ in sound after being on for a period of
time. We usually recommend waiting at least 24 hours before expecting the best quality of sound
reproduction from your preamplifier. Also, as the Plinius Jarrah uses very little power while on, we
suggest leaving the unit turned on so that it will always be at it’s sonic best.