Specifications

6
RECORD SOURCE VOLUME
xxx
TUNER
V
CR
T
APE 1
TA P E 2
AUX
CD
The front of the Plinius 9100 Integrated Amplifier incorporates all the facilities
you will require on a daily basis.
Front Panel Layout Sho
Front Panel Layout ShoFront Panel Layout Sho
Front Panel Layout Showing Volume Knob, Reco
wing Volume Knob, Recowing Volume Knob, Reco
wing Volume Knob, Record
rdrd
rd
And Source Selectors, And Displ
And Source Selectors, And DisplAnd Source Selectors, And Displ
And Source Selectors, And Display LED
ay LEDay LED
ay LED
DISPLAY LED
DISPLAY LEDDISPLAY LED
DISPLAY LED
An LED on the front panel indicates that the power is on. When first switched on, the display LED will
pulse for ten seconds - this is an initialisation sequence, after which the LED remains lit during the time
the amplifier is powered on. Whenever mute or a remote button is pressed, the LED will dim.
SOU
SOUSOU
SOURCE SELECTOR
RCE SELECTORRCE SELECTOR
RCE SELECTOR
This rotary switch enables selection of any of the six different inputs available on the back panel. This
selection is fed to the speakers via the output posts on the rear of the amplifier.
RECORD SELECTOR
RECORD SELECTORRECORD SELECTOR
RECORD SELECTOR
This rotary switch allows recording of any of the six different inputs available on the back panel. Note that
when recording, the source that is being listened to will not be interfered with. For example, it is possible
to be listening to the CD input whilst recording from the TUNER input. Two tape decks can be connected
and dubbing in either direction is possible.
VOLU
VOLUVOLU
VOLUME CONTROL KNOB
ME CONTROL KNOBME CONTROL KNOB
ME CONTROL KNOB
The volume control is an ALPS motorised unit that will accurately convey the source signals to the power
amplification stage of the Plinius 9100. The knob can be adjusted manually or with the remote control
supplied. When using the remote control to alter the volume level, briefly press the button to make small
adjustments, or hold the button down to continuously adjust the volume.