Specifications

Connecting a TV and speakers
There are 5 video output connections to take the picture to your
TV.These are -
1. HDMI digital output(picture and sound)
2. PrPbY component (picture only)
3. SCART (picture and sound,240V version only)
4. S-Video (picture only)
5. CVBS composite video(picture only)
The highest quality connection is at the top, the lowest at the
bottom. Your TV will probably have several connection options
for picture (video) input. For the best quality picture, check which
connections are available on your TV and use the one nearest
the top of the list.
CONNECTING THE AVR-1 TO A TV
There are speaker connections for up to 6 speakers set up in a
surround sound configuration. The speaker connections are
labelled to match the position of each speaker as follows -
- FR is front right
- FLis front left
- RR is rear right
- RLis rear left
- CEN is front centre
- RCEN is rear centre
Position your speakers as instructed in the handbook for the
speakers. Connect the wires from each speaker to the correct
terminals at the rear of the AVR-1 for that speaker. Ensure that
the + speaker terminals (coloured red) connect to the top +
terminals of the AVR-1 by connecting the striped wire to the +
terminals.
CAUTION:- When connecting speaker wires make sure that no
loose wire strands can touch another terminal. This may
permanently damage the circuitry of theAVR-1.
bacde
SCART
YHDMI PR PB
CVBSS-VIDEO
CONNECTING SPEAKERS, A SUBWOOFER AND AERIALS TO THE AVR-1
Front
left
Front
right
Rear
left
Rear
right
Subwoofer
Centre
front
Centre
rear
SPEAKER
LOCATIONS
TV VIDEO CONNECTIONS
5
GB
FM AERIAL
AM AERIAL