Instruction Manual

Page -20-© Audient Ltd
Control Surface Functions
Entering DAW Layer
To enter the DAW layer for control surface
functionality ensure that the DAW switch
(1) is depressed and illuminated.
Whenever it is not illuminated, the
faders and channel switches operate in
the analogue layer.
However, some of the control surface
functionality remains active when in the
analogue layer to aid your session workflow,
allowing simultaneous control of both analogue
fader level and important DAW functions.
These are:
• Transport switches (3-7) jog / shuttle disabled
• Cycle toggle on / off
• Track / region navigation cursor controls
• Shift + navigation cursor controls for horizontal and vertical
zoom
• DAW meters
Console Setup Switch
The setup switch (2) allows you to access a number of useful
networking parameters as well as set the host DAW platform
of choice and check your current firmware revision.
Once the setup switch has been pressed, the OLED displays will
show the first page of the setup menu.
To page through various other pages on the
OLED displays, whether it be in the setup menu
or when accessing insert plugin parameters,
use the page function switches (26) located
under the left most encoder.