Instruction Manual

Page -37-© Audient Ltd
Pan Mode + Assign
By pressing the assign key (30) when in
pan mode, the encoders provide access to
assigning channel inputs and outputs.
This is very useful for setting up inputs
for recording or bussing architecture
when mixing.
Input assigns are set on page one. Use the
page keys (26) to access outputs via page two.
Rotate the encoder to the desired input, bus
or output and press to select.
When assigning outputs, buses as well as physical outputs
will appear as selections on the rotary encoders.
To aid you in navigating your studio setup at a faster pace, try
using the Logic I/O labelling system to name buses something
simple (shortform text) and useful.
Control Surface Functions