User Manual

Operation Manual
41
Master Section
© 8.21
AUXILIARIES
CONNECTORS
Not all of the ouputs are
shown for clarity. It carries
XLR connectors for
Auxiliary A, Auxiliary B and
Auxiliaries 1 through to 12.
(Note that all auxiliaries are
mono.)
The auxiliary outputs are
typically used to send to
effect units such as
reverberation units. They
are line level fully balanced
outputs.
1 2
1 AUXILIARY A and
AUXILIARY B outputs.
These auxiliaries are
normally used as feeds
to the foldback system
by selecting them on the
control surface of the
console. They can also
be used as additional
effects sends.
2 AUXILIARY 1 and 2
outputs. The remaining
auxiliary outputs are
identical.