User Manual

34 35
System Panel
Digital I/O
Format
Clock
Source
Selection
Output
Routing
Selection
Routing
Matrix
Mono
Mode
Dim Level
Alt Speaker
Level
Talkback
Device
Talkback
Source
Input
Source
• ø (Phase Flip)
Pressing this switch flips the phase
of one side of the stereo field. Used
in conjunction with the mono button,
this can be a great way to remove
centred elements from a mix. in order
to hear the hidden elements of a mix.
• Mono
The mono button sums the stereo
outputs down to mono. This can
be used to quickly check the
mono compatability of your mix to
make sure it’ll sound great almost
anywhere!
• Alt
Alt allows you to quickly switch your
monitor path to a seconary set of
monitors to let you check how your
mix translates on various speakers.
You can select which outputs the ALT.
monitor control flips to in the System
Panel
• Dim
Reduces the output level by a preset
amount which can be great if you
get a call or need to quickly chat to
someone during a session.
• Cut
The cut button cuts the signal to the
monitors.
All these controls can be controlled
from the iD44 itself, either by
assigning them to an F-Key, or using
the dedicated Dim and Cut controls.
Assigning F-Keys
Various functions of the iD mixer
application can be assigned to the
Function Keys of the iD44 to allow you
to quickly control your monitoring at the
click of a button.
To assign a monitor control to an F-Key,
simply right click on the control and
select the F-Key.
Software Features Software Features