User Manual

3938
Talkback Source
The Talkback source allows the
talkback input to be taken from on the
iD44’s internal inputs or from a device
connected to the host computer
(Such as a built-in microphone or USB
microphone)
Talkback Device
If an external device is selected then this
allows you to select which connected
device is used.
Saving & Loading Mixer Presets
To allow you to quickly setup your iD
mixer during a session you can save and
quickly load various presets. This is great
if you are moving between recording
scenarios quite often.
Mixer presets can be saved and loaded
in two ways:
• Using the File menu and selecting
either Save or Open
• Using standard keyboard shortcuts :
Save: Mac - Cmd + S
Windows - Ctrl + S
Load: Mac - Cmd+ O
Windows - Ctrl + O
Saving a Preset.
To save a preset, simply setup your
mixer the way that you’d like to save.
Then select File > Save as explained
above. The mixer window should then
show the Save dialog.
Simply enter the name of your preset
and press save.
It is also possible to export your preset
files in order to send them to friends or
to simply save them within your DAW
session files for easy recall later on. To do
this, select Export Mixer Configuration at
the base of the Save screen.
Loading a Mixer Configuration
To load a previously saved preset, select
File > Open to bring up the Load screen.
The previosuly saved configuration will
appear in a list. Select the configration
you wish to use and click Load.
You can also open a mixer configuration
directly from your file by selecting Load
From File.
Software Features Software Features