User Manual

44 45
Operation with Pro Tools
Once iD44 has been successfully
installed following the steps detailed
in this manual, launch Pro Tools and
ensure that a new session is created
at the desired sample rate (if clocking
internally) or at the rate of the clock
source (if clocking externally).
If using Windows, make sure that
you have set the correct latency and
buer size settings in the iD app before
opening a project. Changing these
settings will result in ProTools needing to
restart.
Playback Engine
Go to Setup > Playback Engine... and
ensure that iD44 is set as the active
playback device.
I/O Setup
Go to Setup > I/O... to label your inputs
and outputs and ensure that iD44
is correctly reporting 20-inputs and
24-outputs to and from Pro Tools. Note
that analogue outputs 1-8 are the DAW
playback channels in the iD mixer and
can either be routed through the iD
mixer or hard-wired directly from Pro
Tools to the physical outputs.
For more Pro Tools information
consult your Avid user manuals &
documentation.
DAW Setup
DAW Setup
Pro Tools Setup