User Manual

10
Device Setup
Declaration of Conformities
We, Audient Ltd, Aspect House, Herriard, Hampshire, RG25 2PN, UK,
01256 381944, declare under our sole responsibility that the product Sono
complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received,
including interference that may cause undesired operation
Audient Ltd has conformed where applicable, to the European Union’s Directive
2002/95/EC on Restrictions of Hazardous Substances (RoHS) as well as the
following sections of California law which refer to RoHS, namely sections 25214.10,
25214.10.2, and 58012, Health and Safety Code; Section 42475.2, Public Resources
Please note that Audient Sono is exempt from the EC 1275/2008 power
management requirement for the following reason:
Sono is designed with the musical instrument input being the primary functional
input of the device. When a musical instrument is connected, Sono must be
active to wait for a signal. During a recording session it can take a long time until
a musical instrument is actually played. If Sono would go into a standby mode or
similar, this will cause a disruption to a recording session as the user would expect
the unit to be operational even if the musical instrument input is not being actively
used.
We, Audient Ltd, declare that the product, Sono, to which this declaration
relates, is in material conformity with the appropriate CE standards and directives
for an audio product designed for consumer use.