Operating Instructions

2322
WIRELESS FUNCTIONALITY /
BLUETOOTH CONNECTIVITY
. Using hearing aids with iOS devices
.. Pairing hearing aids with the iOS device / iPhone
To be able to use your hearing aids via your iOS device, you have
to pair it with your iOS device. This is how the hearing aids and
the iOS device communicate with each other. Please follow the
instructions to successfully pair the hearing aids.
1. Press the settings icon on your iOS device.
2. In the Settings menu go to: General → Accessibility →
MFi Hearing Devices under the hearing category
3. If the Bluetooth function is still deactivated on this screen,
activate Bluetooth. While the iOS device is looking for hearing
aids, open and close the battery compartments of your
hearing aids (this puts the hearing aids into pairing mode)
4. Among the devices now displayed, the device name of your
hearing aids appears, created based on your first names. If
this does not happen within 5–7 seconds, press the upper left
edge of the screen to go back to <Accessibility and open MFI
Hearing Devices again.
5. After your hearing aids are displayed, select these from the
list, to connect the devices with the iOS device.
.. Operating hearing aids with an iOS device / iPhone
Your made-for-iPhone hearing aid is equipped for operation with
an iPhone, iPad or iPod Touch.
To use your hearing aid with an iOS device, pair the hearing aid
as described in Section 5.1.1.
There are two ways for you to operate your hearing aids with
your iOS device:
1. Via the menu MFI Hearing Devices
2. Via the quick start menu of the iOS device
In both menus you have access to set
1. The microphone volume
2. The desired hearing program
3. The listening function via your iOS device, with which
the audio signals from the microphone of the iOS device are
transmitted directly to your hearing aids.
6. Two pairing requests appear – one for each hearing aid.
Select Pair to make a final connection. Both requests can be
delayed by a couple of seconds.
7. Pairing is now complete.