Operating Instructions

1716
Warning: Risk of injury!
In very rare cases the dome may remain in the ear
canal on removal. Should this happen, please contact
your doctor or hearing care professional at once.
Please do not try to remove the dome yourself.
Lift your hearing aid and slide carefully over the outer
part of your ear. Carefully pull the tube with the earpiece
out of the ear canal. Switch the hearing aid o by moving
the battery compartment to the OFF position.
.. Removing hearing aids
. Volume and program selection
.. Automatic side balancing of hearing aids
If you have had two hearing aids of the same type adjusted by
your hearing care profes sional, they are synchronised as a pair.
You can tell this, because after your devices have been switched
on, the pairing melody plays in both hearing aids.
After the hearing aids have been paired, all settings made in
one device are also written to the second device. The tones and
melodies are played in both hearing aids with a slight delay.
If the connection is broken, you do not need to take action. The
devices renew the connection quickly for themselves. You can
tell this, because after your devices have been switched on, the
pairing melody plays in both hearing aids.
Your hearing aids feature a
multifunctional rocker switch for
controlling the volume and selecting
the dierent programs.
The multi-function rocker switch can
be activated by pressing the top (+) and
bottom end (-).
.. Multifunctional rocker switch
Volume control
To control the volume, press the multifunction rocker
switch briefly on the top or bottom button also see ...
Program selector switch
To change the program, press the multifunction rocker
switch briefly on the top or bottom button also see ...
Volume control and program selector switch
combined
To control the volume, press the multifunction rocker
switch briefly on the top or bottom button; to change the
program hold the switch down for approx.  second see
also .. and ...