User's Manual

6
Switching on
Your hearing aids are switched on and o via
the battery compartment. To turn on, simply
close the battery compartment.
The battery compartment snap into place
noticeable.
The hearing aids are now switched on. After
a preset delay, the first program will be
activated and the hearing aids will be ready
for use.
Switching o
To switch the hearing aids o, hold the
hearing aid upright and rock it on a hard
surface until the door snaps open. This is the
OFF position see ..
If the hearing aids will be out of use for a long
time, open the battery compartment fully
and remove the battery.
Battery compartment lock
The battery compartment can be locked by
sliding the lock up using a small screwdriver.
In this position the hearing aids can still
be switched o, but the battery cannot be
removed.
. Switching the hearing aids on and o